Question about Cars & Trucks

Open Question


Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Alaam sound is turned off in 2000 mercury mountaineer

The actual alarm horn may be disconnected /shorted bad ground or burnt out . Is the alarm horn the same as the car horn? Does the car horn work? Alarm horns popular for burning out.

Sep 26, 2015 | 2000 Mercury Mountaineer

1 Answer

How do I adjust a handbrake on a 1998 nissian terrano 2?

Most emergency brake cables have adjustment at rear wheel and is a cable adjustment, so follow the cable to rear wheels.

Mar 15, 2015 | Nissan Terrano Cars & Trucks

1 Answer

My horn stop working on my nissian maxima

Just get another s/h horn and plug it into the place of old one and try it also check fuse first but im sure it will be horn problem

Apr 15, 2014 | 2007 Nissan Maxima SL

1 Answer

My horn stop working on my nissian 2007 maxima 3.5SE

check the wiring contacts at your horn may have rust .try clean it.

Apr 15, 2014 | 1995 Nissan Altima

1 Answer

I have a 97 nissan terrano and the heater blows basiclly no heat, fan works fine, where is the problem? have been told pollen filter,flush radiator and possible heater coil?

Nissian has what is called a heater control valve . It is located under the hood in the heater hose going to the Heater core ( not coil ) this vavle controls the flow of coolant going into car it can be plugged or dissconnected . Start by having this checked before any thing else .

Aug 05, 2012 | 1997 Nissan Pathfinder

1 Answer

My 91 caprice horn does'nt work from the steering wheel but when my alarm goes off it blows

You have 2 point of contact one is the alarm and the other is the horn switch itself, the horn switch is non op,

Mar 12, 2012 | Cars & Trucks

1 Answer

How do you troubleshoot the horn

if your horns work with alarm using remote, then fuse and relay good if you hear no horn using remote set off alarm,and horn pad dont work, replace horn fuse and relay, if both okay, you have to replace the whole horn pad with air bag in steering wheel both horn control pads and airbag is one assembly.

Feb 11, 2012 | 1999 Pontiac Grand Prix

1 Answer

Horn works when you hit the alarm button but dont work when you hit the horn from the steering wheel

Check the fuses first, the alarm is likely wired in after the fuse for the horn switch on its own fuse. If it is not the fuse it is either the horn switch itself (inside the steering wheel) or the wiring. If the alarm was installed at the factory when the truck was made it is most likely a fuse, then the switch. If the alarm was installed aftermarket it is most likely a fuse, then the wiring where the alarm was spliced into the horn wire, then the switch. Get back to me if this doesn't help.

Jan 16, 2010 | 2004 GMC Sierra

2 Answers

1989 toyota pickup horn not working, fuse is fine. I have an alarm, is that the same as the horn cause that works fine. Pulled alarm wires a while back and re wired them the sound works fine but horn just...

when I had that problem it was the contacts under the steering wheel pull the steering wheel and you will see a copper ring the horn is connected to ground out that copper ring against the steering column if the horn sounds you have a worn contact I fixed mine by putting a spacer under that copper ring good luck with it

Sep 01, 2009 | 1989 Toyota Pickup SR5

2 Answers

My speed alarm is set at 105 how do i adjust this function?

have to add a comp chip to comp to over ride the gov.

May 25, 2009 | 1991 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides