Question about 2001 Volkswagen Cabrio

1 Answer

Need radio code for 2001 cabrio

It is in safe mode 2

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Use the arrow keys on the radio to change digits and position.. My code is 1098 then press and hold the right arrow key.

Posted on Dec 24, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

snownbird33
  • 120 Answers

SOURCE: radio unlock code

For this code you most likely would have to get it from VW. Unless you get lucky and fine it on the internet. There is a good site to fine that can off stuff just look up the web site scribd.
Hope that this helps.

Cheers

Posted on Aug 21, 2008

SOURCE: 97 VW Cabrio

thank you for your help, I did figure out how to enter the code but unfortunately i entered the wrong code twice so now it is lock, which now brings to problems, ho do I unlock it and how do I reset? thanks for the website and taking the time to help...

Posted on Oct 21, 2008

  • 10 Answers

SOURCE: how can I remove my

You do not need to take the dash apart, there are two little slots oneon each side of the face of the radio, you need special removal tools to unlock it and it will pull right out, but first check in your owners manual, or in the spare tire well for the card, or sticker which has the serial number as well as the unlock code for your radio.

Posted on Jan 28, 2009

  • 2 Answers

SOURCE: radio of safe mode

email me and I will get you the info on how to fix the problem. I have the manual to my 1998 jetta.

Posted on Apr 03, 2009

  • 65 Answers

SOURCE: my vw radio is in safe mode

you will have to leave radio turned on with the ignition on for a hour or so at least.best thing is lock the car with your spare key on leave on the ignition while its on your drive.....eventually it will display code again.

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anti-theft radio security code


Will display safe mode but you have to push the on button then you will get the 1000

Apr 10, 2013 | 1999 Volkswagen Cabrio

1 Answer

My car radio needs to be reset. I have the code but don't know what I after I enter it.


The sequence of programming for 2001 VW Cabrio radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.

For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

Sep 01, 2011 | 2001 Volkswagen Cabrio

1 Answer

The radio/stereo system on my 2001 cabrio convertible doesn't work. I turn the power on and it says "Safe" and then won't play any music. It was working just the other day though, and i...


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Aug 08, 2011 | 2001 Volkswagen Cabrio

1 Answer

Radio is in safe mode the code in book dose not work


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

May 03, 2011 | 2001 Volkswagen Cabrio

1 Answer

Im trying to put in my code to unlock my radio in my 2001 volkswagon capria i have the code but it just stays on safe two


thats right takes about 2 days to show 1000 or 2000 cant remember which number but when it shows this number you can enter code

Oct 04, 2010 | 2001 Volkswagen Cabrio

1 Answer

2 before SAFE on stereo in 2001 Cabrio and won't let me enter code. I have the code.


the radio is locked out.you need to leave ignition on with radio on until it displays code.For how long ??? it can be several hours so if you can lock it on your drive with spare key with other key still in ignition and leave it.hope you get sorted

May 13, 2009 | 2001 Volkswagen Golf

1 Answer

My 04 cabrio radio is on safe mode any universal code i can use?


You can buy a DIN radio removal tool or ask the guys at the local car stereo shop to pull it out for you, I had mine replaced with a Pioneer at circuit city for less than$100. Better sound, better tuner and now I have the old radio with the code on it to put back in if I sell the car.

Jul 27, 2008 | 2001 Volkswagen Cabrio

1 Answer

Safe mode


Radio needs to be removed from dashboard. get the serial number from the ride side of the radio and call dealer with the vin# and the radio serial number and you can get the unlock code

Jul 12, 2008 | 1996 Volkswagen Cabrio

2 Answers

Unlocking my car radio in my voltswagon cabrio


Do you mean after you have typed in the code, you don't know what other button to press? According to the manual, that is the right side (arrow) of the seek/track button located on the left side of the radio. Did you need the number from the side of the radio in order to get the code? Mine is stuck in safe mode as well, and they said I needed to havfe the radio removed to find the number on the side of the radio, along with the vin number. Does that sound right?

May 20, 2008 | 2001 Volkswagen Cabrio

Not finding what you are looking for?
2001 Volkswagen Cabrio Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...