Question about 1992 Chevrolet Corvette

2 Answers

1992 corvette doesn't turn over when key turned

Yesterday for the first time my 92 vette didn't start, (didn't turn over) at all. All the lights and everything else was normal as with a passerby's help, I push-jump started it, and was able to get home. Is there a fuse for the ignition switch starter? or, a fuseable link or something? Note: about a month ago, for the first time, the "service engine soon" light came on intermittently, a couple times. I also have a clogged heater core, and a small water leak comming from the front of the intake manifold, and I have to add water every fow weeks. Thank you very much for any input!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have and 1987 was having problems getting it started every now and then ended up being the neutral safety switch it was starting to go ended up useing a wire and jumping it works fine now just trying to locate a new switch cannot get from gm any more

Posted on Nov 20, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

There should be a starter fuse mate not to sure where might be in engine bay

Posted on Nov 03, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 corvette (61k miles) stored it for winter and tried to start it after 5 months. Battery dead, charged it, started it, but check engine light turned on. Did that trip the light because of this? ...


I think if you own a corvette you should go to
Helm.Com & spend the big bucks for all the manuals,
& work on it yourself, as I did for the last 49 years
starting with a new 1965 Vette

Mar 16, 2013 | Cars & Trucks

1 Answer

I have a lt 1 engine in a 94 z 28 that i want to install in a 92 corvette that once had a lt 1 engine i was told that it would be easier to go back with a carburator than to change out the wiring etc...


This will take some time ether way. I would rather go with the carb. but I'm old school. You can keep the Electronics and fuel injection from the Vette and reinstall on to the Camaro engine. Basic same engine. If you do not have a engine in the Vette to swap parts off of, then go with a good Edelbrock manifold and carb. This will be the easiest to set up and keep in tune. Its Christmas and family needs to know all your wants, it'll be easy to tell them. Manifold, Carb. & time to do it, plus a little help with the gas.

Nov 20, 2010 | 1992 Chevrolet Corvette

1 Answer

Having problem with my 92 vette dieing on me in


When was the last tune up? What was changed? Coils are notorious for a non running condition. Dead cell in battery or loose battery connections can make it stall. Bad alternator also. Bad fuel filter or fuel pump. Any of these are places to start checking.

May 27, 2010 | 1992 Chevrolet Corvette

2 Answers

My 99 vette makes a click sound when I try to start it. It wont start but the battery has a full charge. The hood light and interior lights go out when I turn the ignition key to start but they come back...


Sounds like a dead battery. However, I will tell you that these vehicles are very sensitive to voltage. Try cleaning the battery cables and tightening them properly.

May 11, 2010 | 1999 Chevrolet Corvette

1 Answer

Power windows wont work on 92 vette. where is fuse for them?


Either behind the driver side kick panel or under the hood in a fuse box by the battery.

May 04, 2010 | 1992 Chevrolet Corvette

1 Answer

How do i tke off the top to a 92 vett


its pretty easy. it only has 4 bolts. 2 that are in front 1 in front of the driver and the second in the front of the passenger, if you move the sun blocker you will see a hole. loosen those because they dont come off. the other 2 are behind the driver and the passenger which do come off entirely. you will need the corvette tool to remove all of them or maybe just an allen key will do.

good luck

Aug 02, 2009 | 1992 Chevrolet Corvette

2 Answers

I check the lights on my 92 corvette with the engine off and they seem bright enough, but when driving the car the lights are very dim(headlights, tail lights etc.)


With the ENGINE OFF, the battery is giving it's full power ( or what is left ) to turning on the lights. A whole bunch of power is needed when a ' Vette is running. That being said , sounds to me like the alternator is not producing the required amount of voltage. Hope this helps

Jun 05, 2009 | 1992 Chevrolet Corvette

1 Answer

1992 vette wont start for about 20 minutes


I have seen this alot on the 90 ish vettes and it is going to be something to do with the security. When you have time I would just take it to the dealership so they can scan it and find out which part is bad and loosing memory.

Jun 02, 2009 | 1992 Chevrolet Corvette

Not finding what you are looking for?
1992 Chevrolet Corvette Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...