Question about Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: heater core replacement
It's one of the easiest cores to replace that I have encountered. Disconnect heater hoses at firewall. Probably doesn't matter about hose placement, but I always mark them just in case. To remove the fiber cover under dash, take a flat blade screwdriver and pry out the center pin of the expansion clips that hold it in place. There are four 5/16 head screws that hold the bottom/drain tray cover. Core will pull through the firewall and then down. You may have to silicone/glue or replace the foam seal strips on the new core. Before you install the core, check the distance between the inlet and outlet tubes to ensure they match the openings in the firewall. This saves time. It helps if you have someone on the outside to guide you when stabbing the tubes through the firewall. Replace bottom cover. You may have to hold one of the tubes when reinstalling the first hose to the core. Replace any lost coolant and check for leaks prior to reinstalling the fiber cover. If the cover seal is in good condition, any leak should drain through the firewall, otherwise it may leak inside cab. .
Posted on Sep 10, 2008
Before starting this job I would get a repair manual. This is not a easy job, 6+ hours for an experienced tech with all of the right tools. And you may have to discharge and recharge the AC system.
Posted on Jan 30, 2009
REMOVE OR DISCONNECT
Posted on Apr 03, 2009
Fuses & RelaysThe fuse box is located under the engine hood on the left side, near the upper strut housing or near the battery.
Various relays are also mounted on the fuse box for easy accessibility.
The flashers are located behind the bottom center of the lower instrument trim panel.
- BMW E36 Fuse Box Relay Layout
- 325ci Owners Manual
Posted on Oct 23, 2009
http://forums.bimmerforums.com/forum/showthread.php?t=1209580 If you need to replace the intake
This link will guide you thru step by step with pix... it took me approx. an hour to replace!! Good luck!!!!
Posted on Apr 26, 2010
Tips for a great answer:
Jun 07, 2017 | BMW Cars & Trucks
Nov 10, 2013 | Cars & Trucks
Dec 14, 2010 | 2003 BMW 325
May 02, 2010 | 1994 BMW 3 Series
Apr 10, 2010 | 2001 BMW 325
Jan 11, 2010 | 2001 BMW 325
Nov 08, 2009 | 1999 BMW 318 ti
Oct 05, 2009 | 2006 BMW 750Li
Mar 21, 2009 | 2001 BMW 325
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: