Question about 1998 Chevrolet S-10 Pickup
Where is the relay for the fuel pump
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1991 chevy s10 blazer
Check the fuse under the dash. Did you replace the inline fuel filter? If not, you could loosen the line going into the filter then turn the key to the on position. The pump should run for about 2 seconds then the relay should kick off. Turn off the key for approx. 5 seconds then cycle key back on and the pump should cycle again. If you get a 2 second burst of fuel each time then the pump is cycling. Install a new fuel filter and check the grounded wire by the tank. Hope this helps. :)
Posted on Nov 03, 2008
fuel sending unit is in the tank. this is normal after about 75k miles and up. pump and sending unit are sold together. fuel sloshes from front to rear making the float on the sender rise and fall.
Posted on Apr 21, 2009
The Fuel Pump Relay is located in the Glove Box under a little cover on the upper left side. The Fuel Control Relay is the left relay and The Fuel Pump Relay is the right. To test these relays, swap them and then try to start the vehicle, or blow the horn. If the horn blows then use that relay for the pump and you may at least drive the vehicle where needed! If the vehicle starts, then replace them as a pair.
Posted on Apr 27, 2009
Tips for a great answer:
Apr 03, 2018 | Cars & Trucks
Feb 06, 2017 | 1998 Chevrolet S-10 Pickup
Sep 07, 2015 | Cars & Trucks
Sep 06, 2014 | Cars & Trucks
May 02, 2012 | Chevrolet 1500 Cars & Trucks
Apr 01, 2012 | Cars & Trucks
Aug 27, 2011 | Chevrolet Chevy Cars & Trucks
Oct 29, 2009 | 1998 Chevrolet S-10 Pickup
Oct 05, 2009 | 1998 Chevrolet S-10 Pickup
May 29, 2009 | 1998 Chevrolet S-10 Pickup
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: