Question about Toyota Pickup
Sedan, diagram please, How to replace all belts?
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: serpentine belt
any repair shop will charge about .5 hours to replace. If your unsure about how to do it, don't. You will end up loosing more than your patience by trying it yourself
Posted on Aug 04, 2008
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
Posted on Nov 29, 2008
The 97 Corolla has three accessory belts. The alternator belt is the one you see when you look down on the passenger side standing near the front of the engine compartment. If fits over the alternator and the engine pulley. The belt beneath it is the a/c belt (if the car has a/c). It fits over the engine pulley and the a/c compressor. The power steering belt is toward the rear of the engine compartment, on the same side. It fits around the engine pulley and the power steering pump.
Replacing the alternator belt is not too difficult. Standing in front of the car and facing towards the rear, loosen the locking bolt under the right side of the alternator. Then loosen the alternator hinge bolt on top of the alternator. Now you are ready to loosen the alternator belt tensioner adjustment bolt, accessed under the alternator from the front. Turn the tensioner until the old belt is loose enough to remove, then turn it further so that the new belt will go on easily. Replace the belt and re-tension until you have about 1/4 in. to 1/8 in. of play in the belt, tighten the lock bolt and the hinge bolt, and run the engine. If the belt squeals it means you need more tension, but do not overtension. Recheck it after a few days.
Posted on Mar 23, 2010
Tips for a great answer:
Dec 11, 2014 | 1989 Toyota Corolla Sedan
Sep 26, 2014 | 1994 Toyota Corolla
Sep 18, 2014 | 1998 Toyota Corolla Sedan
Sep 02, 2011 | 1989 Toyota Corolla 2 Door
Feb 12, 2011 | 1995 Toyota Corolla
Jul 02, 2010 | 1999 Toyota Corolla
Mar 22, 2010 | 1997 Toyota Corolla
Mar 02, 2009 | 1989 Toyota Pickup SR5
Nov 29, 2008 | 2006 Toyota Corolla
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: