Question about 1986 GMC S-15
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like it only runs on starter fluid.sort of. Mine is an 84 with a carb. You may have a bad fuel injector or dirty at best. Have your checked for good spark or dist rotor pointing to #1 in dist cap at TDC. The timing chain may have worn and jumped a couple of teeth
Posted on Sep 26, 2009
SOURCE: firing order for a 1986 gmc s15
To avoid confusion, ALWAYS replace spark plug wires one at a time.
The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.
Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise
Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise
Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 05, 2009
For this models:
1986 GMC S15/T15 4WD P/U 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 4WD Jimmy 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 2WD P/U 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 2WD Jimmy 2.8 liter V-6 VIN "R"
Hope helped woth this. Remember rated this help. Good luck.
Posted on Nov 24, 2009
Tips for a great answer:
Apr 17, 2015 | 1986 GMC S-15
Jun 25, 2012 | 1986 GMC S-15
Feb 19, 2011 | 1986 GMC S-15
Sep 19, 2010 | GMC S-15 Cars & Trucks
Nov 24, 2009 | 1986 GMC S-15
Oct 29, 2009 | 1986 GMC Jimmy
Oct 13, 2009 | 1986 GMC Jimmy
Oct 05, 2009 | 1986 GMC S-15
May 07, 2012 | 1986 GMC S-15
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: