Question about 1995 Ford Mustang
Posted by Anonymous on
What ECU fault codes are you reading? If you haven't done the EEC4 fault code test here is how you do it to read the fault codes. Follow the link EEC IV Self Test Ford Fuel Injection and EEC IV Electronic Engine Control...
Posted on Apr 26, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: car runs rough at idle
clean out ur throttle body, just follow the hose from the air filter to the throttle body. Need 2 people to do this. Don't remove the hose completely from the throttle body. Just enuff to be able to spray ur intake cleaner into the throttle body. Do this especially if its worse when the motor is hot, as this would confirm the problem.
Posted on Sep 04, 2008
Tips for a great answer:
Sep 16, 2017 | Cars & Trucks
Nov 15, 2015 | Cars & Trucks
Jan 28, 2014 | 1995 Ford Mustang GT
Jan 15, 2013 | 1989 Ford Mustang
Engine stalling and rough run
issue at low speeds
This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control
Sep 03, 2012 | Chevrolet Silverado 2500HD Cars & Trucks
Apr 10, 2011 | 1995 BMW 8 Series
Jan 14, 2011 | 1986 Ford Mustang
Feb 16, 2010 | 2006 Ford Mustang
Oct 19, 2009 | 1995 Mercury Grand Marquis
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: