Question about 2005 Chrysler Town & Country

Open Question

Change starter on 2005 town and country

I want a diagram and installation directions for replacing the starter on a 2005 town and country

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chryslertech
  • 115 Answers

SOURCE: low speed fan relay for the 2005 chrysler town and country

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

Posted on Mar 08, 2009

Ad
c17hydro
  • 2984 Answers

SOURCE: how do you change the starter on a 96 town and country

  1. Disconnect the negative battery cable.
  2. Raise and safely support the front of the vehicle securely on jackstands.
  3. Disengage the solenoid wiring connector from the terminal. This connection may be held in place by a retaining nut, or it could be a push-in connector.
  4. Remove the B+ nut and wire from the starter motor terminal.
  5. Remove the starter motor-to-transaxle bellhousing mounting bolts.
  6. Remove the starter from the vehicle. If equipped, remove the starter motor spacer.
To install:
  1. If equipped, hold the starter motor spacer in position.
  2. Install the starter motor into position on the vehicle.
  3. Install the starter motor-to-transaxle bellhousing mounting bolts. Tighten the mounting bolts to 40 ft. lbs. (54 Nm).
  4. Engage the solenoid wiring connector onto the starter terminal.
  5. Connect the B+ wire and tighten the retaining nut to 90 inch lbs. (10 Nm).
  6. Lower the vehicle.
  7. Connect the negative battery cable.
  8. Verify starter motor operation.
Posting pics on next post!

Posted on Oct 18, 2009

johnjohn2
  • 5763 Answers

SOURCE: Replacing a thermostat in 2005 Town and Country Mini Van

yes you are correct.

Posted on Nov 06, 2009

sourav007
  • 297 Answers

SOURCE: how do you change out a left side mirror assembly

1. Pop off the triangular piece that is just cosmetic on the upper flat part of the mirror where it is attached to the van.
2. Under this piece are two visible bolts which you will need a Torx driver to remove.

3. Open the passenger door all the way open and remove the 3rd bolt, which is exposed from the outside of the car.
4. Expose the wiring harness plug by doing the following:
a. Pull off the door weatherstripping along the top of the door and on the pillar (the part of the car to the left of the windshield) Do not completely remove the weatherstip - simply pull it away enough to execute the next step.

b. Remove the plastic pillar cover: it simply snaps in. Pull hard and it will pop off
c. Lift up the plastic cover over the speaker on top of the dashboard. This piece goes all the way across the dashboard. Simply lift it up enough to get your hands underneath it. There is no need to free it from the passenger side.

d. Follow the mirror wiring harness around the rear of the speaker (the side nearest the engine) and unplug it from the female connector at the right-rear of the speaker. There may be a wire clip at the left-rear of the speaker that you will need to get the wire out of.
5. Unplug the wire, remove the mirror, replace the mirror, reinstall everything

hope its work

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a wheel bearing on a 2009 Chrysler town & country


you should purchase a shop manual for this as it will have complete diagrams and step by step directions

Oct 17, 2014 | 2009 Chrysler Town and Country

2 Answers

Where would i get a diagram to show me where the crank sensor on my 1997 town and country van is


The crank sensor will be located on the back of that engine. By the starter. YouTube has a cool video about it.

Oct 03, 2014 | 1997 Chrysler Town & Country

1 Answer

How to replace the starter on 2005 Chrysler Town Country 3.8 engine.


SERP BELT OFF/ 2 BOLTS /1 NUT ON WIRE/ A PLUG, OUT WITH THE OLD IN WITH THE NEW, NOT TOO HARD. MIGHT HAVE TO MOVE/REMOVE A FEW THINGS THAT ARE IN THE WAY, BUT NOT A HARD JOB TO DO

Nov 03, 2013 | 2005 Chrysler Town & Country

2 Answers

My 2005 Crysler Town and Country has a rattle noise coming from the serpentine belt area(maybe alternator) when the A/C is on and I'm in gear, but not moving. A/C compressor has been replaced with new...


just fixed rattling problem on my 2005 grand caravan 3.8 replaced alternator pulley has a clutch effect when i twist it back and fourth by hand could hear rattling and squeaks replaced alternator and pulley and rattling is gone

Oct 11, 2010 | 2005 Chrysler Town & Country

1 Answer

Steering column 2005 chrysler town and country


You can buy a haynes manual to remove it but most manals won't have that information, why do you want to change it and if you have a camera I can tell you how to remove and replace it if I have a picture of it.

Jun 13, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 Chrysler town & country touring won't turn over.


Sounds like you need a starter, or you have a loose wire somewhere under the hood.

Apr 25, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 town & country won't re-start after shut down..


Check and see how much your alternate is putting out. Make sure that your battery cables are clean. Check the water in the battery. It sounds more like a connection problem than stater.

Mar 06, 2009 | 2005 Chrysler Town & Country

1 Answer

Heater putting out cool air.


i need a diagram to replace the rear pads i can't take off the caliper on 2005 chrysler town & country

Dec 16, 2008 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...