- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,just food for thought,when you switched the lights on did you check if there is aney power to the lights with ignition on,I thought that then atleast you would know that its not before the lights if there is power there.all the best,hope you get it sorted out.
P lights and fogs are fused separately to h lights. Go to the fuse box. Next the high low relays, then the column switch, but have a test lamp ready to test for a supply at the actual headlamp because if there is power to the lamp but no light, check the ground wires from the headlight unit are tight and on clean bare metal
check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car
could be bad bulb or while you were changing plug wires you disturbed the headlight wiring.check grounds,try moving the head light wires around to see if bad connection.if pass sides working it shouldnt be fuse or switches.