Question about 2004 Cadillac Escalade

Open Question

2011 escalade front bumper removal - 2004 Cadillac Escalade

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: 2003 escalade how to remove front bumper.

I just took this one on today. You'll need a flat head screw driver (a clip puller if you have one) a 15mm socket with a 10" extension and 10mm socket. Pop the hood, remove the plastic guard over the radiator and grill. Remove the 10mm bolt in the center of the grill. Remove the grill by popping the clips off each side then the grill will remove by pulling up. Remove the headlights by removing the two pins, one on top one on the inside of the lamp assembly. Remove 4, 15mm bolts from the top side of the bumper (2 upper, 2 lower that require the extension). From underneath the vehicle remove 2 more 15mm bolts (one from each side). The bolts are located just outside of the fog light assembly and sit horizontally. The bumper is now ready to be uncliped. From the inside of the wheel well use a Flathead screw driver to push in the clip while pulling the bumper away from the mounts. I used a large floor mat to keep the bumper from hitting the ground directly. It's helpful to have a second person to help on the last step.
Good Luck!

Posted on Jan 23, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the low beam headlight on drivers side of suzuki kazahi


You need to remove the front bumper.
It is easy but tricky.
Once the bumper is off you need to remove all the plastic head lamp.
You'll see the light bulbs once you remove a round rubber cover in the back of the plastic head lamp.

Oct 24, 2013 | 2011 Suzuki Kizashi

1 Answer

Hyundai veracruz front bumper


Its fitted by screws and held by assembly.Give proper support to lower side and loosen the screws and bumper should easily come off.
---------------For complete step by step details,go through the help links mentioned below :-----

How to Attach the front bumper cover to the fender on 2010 Ford Explorer?

http://technoanswers.blogspot.com/2012/01/how-to-attach-front-bumper-cover-to.html
-----------

How to replace Bumpers on Acura Car models?
http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-bumpers-on-acura-car.html
-----------

How to Replace Front Bumper on Audi A4 and VW Passat?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-front-bumper-on-audi-a4.html
----------These will help.Thanks.

Nov 28, 2012 | 2008 Hyundai Veracruz

1 Answer

I lost my lower front bumper (the black plastic part) i have a new one but not sure how to put it on


There is a simple procedure to do that.And basic tools are required.

Click the link below for detailed procedure:----
How to Replace Front Bumper? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-front-bumper-on-audi-a4.html

-----------
How to Replace a Front Bumper Cover? http://technoanswers.blogspot.com/2011/07/how-to-replace-front-bumper-cover.html

----------
How to Attach the front bumper cover to the fender? http://technoanswers.blogspot.com/2012/01/how-to-attach-front-bumper-cover-to.html

--------------

How to replace Bumpers?
http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-bumpers-on-acura-car.html

--------------
This details will help.
Thanks.

Oct 09, 2012 | Cars & Trucks

1 Answer

How to remove 2004 escalade rear door panel


Its simple its fitted by screws,that you need to remove,then pry the panel oiut with small putty knife.Take care no electrical connectors gets pulled off ot cut off.

There are few help links to complete this task of removing door panels.Click the link below:---



How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html




----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html


---------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-------
This will help.
Thanks.


Jun 07, 2012 | 2004 Cadillac Escalade

1 Answer

Remove front bumper


For front bumper removal,i suggest you to click the link below :---How to Replace Front Bumper? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-front-bumper-on-audi-a4.html
-------How to Attach the front bumper cover to the fender? http://technoanswers.blogspot.com/2012/01/how-to-attach-front-bumper-cover-to.html

-----------------

This will help.

Thanks.

Dec 14, 2011 | 2007 Suzuki SX4

1 Answer

2003 escalade how to remove front bumper.


I just took this one on today. You'll need a flat head screw driver (a clip puller if you have one) a 15mm socket with a 10" extension and 10mm socket. Pop the hood, remove the plastic guard over the radiator and grill. Remove the 10mm bolt in the center of the grill. Remove the grill by popping the clips off each side then the grill will remove by pulling up. Remove the headlights by removing the two pins, one on top one on the inside of the lamp assembly. Remove 4, 15mm bolts from the top side of the bumper (2 upper, 2 lower that require the extension). From underneath the vehicle remove 2 more 15mm bolts (one from each side). The bolts are located just outside of the fog light assembly and sit horizontally. The bumper is now ready to be uncliped. From the inside of the wheel well use a Flathead screw driver to push in the clip while pulling the bumper away from the mounts. I used a large floor mat to keep the bumper from hitting the ground directly. It's helpful to have a second person to help on the last step.
Good Luck!

Aug 16, 2010 | 2004 Cadillac Escalade

1 Answer

How to take off existing fog lights on a 2003 escalade and install new fog light assembly


The fog lamp assemblies can be removed by getting underneath the front bumper and on top of the fog lamp assemblies you will find the metal mounting bracket. The bracket attaches to the vehicle with 3 small bolts that are 8-10mm (i forgot exactly) that bolt down through the bracket into the front bumper cover above the actual lens itself and can be accessed with a box wrench. I replaced both assemblies in mine in under 1/2 and hour!

Jun 24, 2010 | Cars & Trucks

1 Answer

Having trouble finding radiator drain valve/screw/petcock.


most are at the very bottom of radiator on left side u might have to remove that black shield uder the front bumper

Oct 03, 2009 | 2000 Cadillac Escalade

1 Answer

Where can i find a diagram of horn wiring for 2002 escalade or can someone tell me where the horn and relay is?


the relay is listed in the owners manual under fuses that tells you where your relay is your horn should be some where behind yopur front bumper

Apr 03, 2009 | 2002 Cadillac Escalade Ext

1 Answer

I need to remove the spare tire from underneath my 2004 Escalde?


The spare is held in place by a cable hoist, the the tool kit for changing tires has the crank to lower the spare. the access hole is through the bumper in most cases, look under the rear bumper u will see the crankin down access easily that way.

Nov 10, 2008 | 2004 Cadillac Escalade

Not finding what you are looking for?
2004 Cadillac Escalade Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...