Question about 2003 Toyota Tacoma

1 Answer

2003 parking bulb toyota tacoma

How to I change my parking light bulb on my 2003 toyota tacoma?

Posted by on

  • Anonymous May 07, 2009

    trying to replace parking light on toyota 4runner

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front turn signal bulbs on my 2007 Toyota Tacoma have two elements in them, but only one is being used. Aren't these bulbs supposed to be parking lamps also?


That depending on location of bulb. Yes they r also used for parking and other things. Maybe the location of bulb iss turn signal only

Sep 29, 2015 | 2007 Toyota Tacoma

1 Answer

How do you change the front parking light bulb on a 2008 toyota tacoma


if you can not access or see the bulb under the hood in the corner at the fender or inside of fender you will have to remove the headlight assembly and all car makers are making changing bulbs a pain. if you do have to remove the headlight assembly then the steps per repair manual are to remove the grille,bumper cover,bumper filler.believe me there are a lot of customers that wonder why us technicians have to charge so much just to put a bulb in but we did not design the car and it is crazy what you see now days.........good luck and i hope this will help and if i can give any more details let me know......the bulb will twist to remove when you get to it.........let me know how you come out with the project.......

Jun 19, 2011 | 2008 Toyota Tacoma

1 Answer

How do I change my dash lights in my 2003 Tacoma


if it is like my 99 taco that i had then remove the bezel ,2 or 3 screws on top under side of dash pad and pull it out gently. i think there are some clips at the bottom. then there are about 4 screws holding the instrument cluster in the dash. remove them and pull out cluster. bulbs are on the back side . just quarter turn . hope this helps.

Aug 30, 2010 | 2003 Toyota Tacoma

1 Answer

I have a 2008 Tacoma, I plugged in my trailer and lost my running lights or parking lights (tail), found a short in the trailer lights,resolved that...blew a fuse on the tail lights, changed it still no...


hi...

1.may be the bulb might have fused off. did you trying changing the bulb. if not try changing it and try it.

2.may be the wire which connects the bulb have been busnt out before the fuse fuses off.this is occurs because of using wrong grade fuse. try checking the wires are in good condition.

please rate me if the information which i provided was usefull for you. you can rate me by clicking on the thumb icon which is located on the bottom of the page

Jul 09, 2010 | 2008 Toyota Tacoma

1 Answer

How do I replace the parking lights on the front of a 2002 Toyota Tacoma?


1. Open the hood.
2. Remove the one screw holding the side marker housing inside the engine compartment about half inch from fender edge.
3. Pull the side marker and unplug electrical connector.
4. Remove bulb holder counterclockwise.
5. Pull bulb straight out.
6. Reinstall in reverse order.

Mar 21, 2010 | 2002 Toyota Tacoma

1 Answer

How do you change dashboard lights in a 2003 toyota tacoma


You need to remove the instrument cluster assembly. You have to remove the cover on the steering column, and then the fascia, in front of the cluster. Next, remove the 4 screws that holds the cluster to the dash. Pull the cluster out, and remove the witing connectors. The bulbs are accessible from the back of the cluster. The bulb replacement can not be done 'from under the dash'.

Nov 21, 2009 | 2003 Toyota Tacoma

1 Answer

I only have low beams, no high beam -- hi-beam indicator light is on. 2003 Toyota Tacoma.


are the high beam headlight bulbs blown? if not replace highbeam relay or fuses

Jul 05, 2009 | 2001 Toyota Tacoma

Not finding what you are looking for?
2003 Toyota Tacoma Logo

929 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...