Question about 2003 Ford Focus
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ford focus 2002
The blower motor may not be working for a couple of reasons.....first, easiest, check the fuse. in the panel under the driver's side. If the blower used to work fine but then suddenly quit all together...check the fuse. If the motor only worked on say the highest speed when the other speeds no longer work then check the resistor which is located in the air box. It is put there by the engineers cause that resistor gets hot and the heat ultimately is the undoing of the resistor. so if only some of the speeds on the blower work...check the resistor....well replace the critter. You can do it yourself if you are built like a spaghetti noodle and have small girly hands. the parts isn't very expensive.
Posted on Mar 19, 2009
Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.
Posted on Jun 16, 2009
The doors in the blower/heater/evap housing are sticking because of an issue with the vacuum or elec servo motors or improper computer command
Posted on Sep 28, 2009
You'll need to check the voltage coming out of the switch. If it proves to be okay than you'll have to replace the resistor block in the heater box, this is a small rectangular black plastic plate with four wires connecting to it. It should be located under the hood on the passenger side firewall. Remove the two 5/16ths retaing screws and remove the block. To replace reverse the order given here. Thank you, Dana
Posted on Nov 15, 2009
Testimonial: "thank you very helpful info "
Tips for a great answer:
Oct 19, 2014 | 2003 Ford Focus
Jun 12, 2011 | 2000 Ford Focus
Mar 11, 2011 | 2003 Ford Focus
Dec 21, 2010 | 2003 Ford Focus
Nov 15, 2010 | 2003 Ford Focus
Jan 09, 2010 | 2003 Ford Focus
Nov 26, 2009 | 2000 Ford Focus
Jun 16, 2009 | 2000 Ford Focus
Jan 08, 2009 | 2003 Ford Focus
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: