How do you change ford focus estate 2000 x reg dashboard lights
Lights have gone in my dash you cant see speed or revs when its dark how do you take apart the front to change it also my ciggerette lighter is not working would be grateful if someone could give advice please thankyou very much
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert that has over 500 points.
An expert whose answer got voted for 20 times.
Re: how do you change ford focus estate 2000 x reg...
HI THERE I TAKE IT THE BULBS HAVE GONE BEHIND YOUR DASH FIRSTLY MAKE SURE THE REST OF THE DASH LIGHTS ARE OK LIKE HEATER/SWITCHES ETC IF THEY ARE OK THEN WE CAN RULE OUT FUSES CAUSE THEY ARE NORMALLY ON SAME FUSE.
TO STRIP DASH YOU WILL NEED TO REMOVE TORX OR PHILLIPS SCREWS AT COVER OF SPEEDOMETER YOU CAN NOW REMOVE COVER NOW YOU WILL SEE PHILLIPS OR TORX SCREWS HOLDING IN SPEEDOMETER REMOVE SCREWS AND MOVE SPEEDOMETER ONCE YOU HAVE DONE THIS DISCONNECT PLUG AT BACK OF SPEEDO YOU SHOULD BE ABLE TO GET TO BULBS ONCE YOU HAVE DONE THIS REPLACE BLOWN BULBS AND REBUILD BACK UP IF THIS HELPS YOU PLEASE RATE IT THANX.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try going to an Autozone, Advance, or Oreilys autoparts store for a free scan. They may have a scanner which will read this warning and actually tell you what part is bad.
You may have a dirty bumper sensor(First try wd40 on it) or a problem with the airbag triggers inside the dash. Do not fool with the dash. It can deploy the airbags and then you are looking at injury and hundreds of $ to replace them.
Running lights (left side): Fuse #47 -- Running lights (right side): Fuse #48 -- Brake lights: Fuse #54. Fuse panel is on the lower left side (underneath) the dashboard. NOTE: If it is your brake lights that are not working and fuse # 54 looks okay, check the brake light switch, it may have gone bad. Dome light is fuse #46 or #47 depending on model.
try to refresh them with a grinding polisher like safecut or similar is the same compound with one who the painters use to remove scratches from the cars paint.dont use electric polisher try by hand amazing results!i have done this to mine.
Try changing your idle control valve or stepper motor which is the same thing.try cleaning it first before buying a new one,this could be done with caburetter cleaner, let dry before replacing,hope this is helping ty.