Question about 2008 Hyundai Veracruz
How to change fuel filter on a hyundai veracruz
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.
Posted on Jan 19, 2009
go ahead and change the filter. There is no need to bleed it after changing the filter. Just start up the vehicle and let it run for a minute or two.
Posted on Feb 09, 2009
Tim,I would take you Veracruz to Sears and ask them to show you a Michelin set. They will tell you what the proper size is.
The Michelin is a little more money but its the best tire.
I hope this helps you.
Posted on Sep 12, 2009
I have an '03 Hyundai Accent 1600cc. I am told by the techies at the local dealer, the fuel filter is ON the fuel tank. You gain access to it by removing the back seat, then opening the panel beneath the back seat. Replace the filter, screw the panel back onto the floor and the job is done....
Posted on Feb 19, 2010
Open the rear hatch. Using a small straight edge screwdriver, insert the screwdriver into the slot at the top of each of the two screwcovers on the inside lip of the tail light assemby and carefull pry open. Remove the two screws using a philips screwdriver. Drape a small cloth over the head of a larger straight edge screwdriver and insert at the tip of the tail light assembly (on the rear side of the car and carefully turn back and forth while wiggling the entire assembly. This will eventually allow you to work the tail light assembly loose from the grip pin that is holding the assembly on. Once removed, replace the appropriate bulb. With the assembly still not installed, have someone step on the brake to ensure the new bulb is working properly. Reinstall assembly. Hope this was helpful....I just changed mine.
Posted on Jun 12, 2010
Tips for a great answer:
Jul 10, 2016 | 2010 Hyundai Veracruz
Mar 10, 2016 | Hyundai Cars & Trucks
Nov 27, 2015 | 2011 Hyundai Veracruz Limited
Sep 08, 2015 | 2011 Hyundai Veracruz Limited
Feb 02, 2014 | 2012 Hyundai Veracruz GLS 4dr SUV 3.8L V6...
Aug 17, 2010 | 2008 Hyundai Veracruz
Sep 12, 2009 | 2007 Hyundai Veracruz SE
322 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: