Question about Nissan Cars & Trucks

Open Question

2004 nissan quest having a hard to start and service lite is on

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Programming nissan Quest Remote control

I have a used Nissan Quest 1999 that Remote Control does not work . How can I program it?

Posted on Sep 01, 2008

Ad
co7196
  • 3433 Answers

SOURCE: 2004 Nissan Quest - Engine chatter/knocking

Ther e is a chance your injectors are leakin g down and there is excess fuel in the cylinders. Not a good thing. So, you fuel pressure and injectors need chkg. good luck

Posted on Jun 09, 2009

dsacco86
  • 1077 Answers

SOURCE: service engine soon, TCS off, SLIP

The oil change wouldn't cause this problem. Just in-case, check the engine oil level.

There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.

Posted on Oct 11, 2009

Testimonial: "very helpful. i have the mechanic checked the car , the sensor says it has a malfunction in P0340"

SOURCE: 2004 nissan quest DTC P0507. Can't get IAVL to

Have the car re-learn the larger amount
of air volume that the modification creates, here is the procedure for doing this. It's
similar to the ECU clearing procedure:
1) Drive the car to "warm up" temperature. Make sure your idle is close to 700 rpm.
2) Ensure any battery draining devices are off. Ie. headlights, interior dome lights, HVAC,
stereo.
3) Turn the car ignition key to "OFF"
4) Wait ten seconds
5) Turn the key to "ON" (not start)
6) Wait three seconds.
7) Perform the following five times in five seconds or less. Fully press the gas pedal and
release.
8) Wait seven seconds from last of the five releases.
9) Fully press the gas pedal and hold down. Within ten seconds the "Service Engine Soon"
light should begin to blink.
10) Wait another ten seconds (while still holding the gas pedal) and the "Service Engine
Soon" light should stop blinking.
11) As soon as it stops blinking, release the pedal, start the car and check the idle
(should still be around 700 rpm)
12) Let the car idle at 700 rpm or so for about 25 seconds, rev the engine a few times and
then let it return to idle.
13) Shut the car down.
You car has now relearned the new air volume, which should be different than it was
(stock). You may notice a bit of a rough idle for the next 20 miles. This is normal and
will go away. The reason you should make sure idle is around 700 rpm (full warm up) is
because the car measures the air curve in relation to idle, so you don't want to confuse
it.

Posted on Feb 25, 2010

  • 7 Answers

SOURCE: Reprogram my 2004 Nissan Quest keyless remote w/sliding door

it diddnt work

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a leak -looks like transmission fluid- can't find where it is coming from. 2004 nissan quest


put a clean cardboard sheet under the vehicle and keep an eye out for where the leak falls from.. follow up from that spot until you see the fluid itself..sometimes its hard to see but if you use a strong flashlight you may see better..it will look brownish or brownish-red in color..if its black then its motor oil...if its clearer then it may be brake fluid or power steering..

Feb 24, 2013 | 2004 Nissan Quest

2 Answers

My 2004 Nissan quest and starts but when I'm


your timeing is out might need new timeing belt

Mar 24, 2012 | 2004 Nissan Quest

1 Answer

2004 nissan quest no spark


Pcv hose on upper rear of intake manifold rotted through and causing a vacume leak. spray carb cleaner at mid rear of manifold and idle will drop and stall. pretty hard to replace but thats nasty nissan.

Aug 21, 2010 | 2004 Nissan Quest

1 Answer

Yesterday, my 2004 Nissan Quest had the front end bushings and control arms replaced. The car still has a "knuckling" noise when I'm making semi-hard left or right hand turns. Forget about hard turns!! ...


it usually does but you have also an intermediate shaft that connects steering column to steering rack, I know those at times can cause the exact noise you describe although what you replaced usually does.

Sep 02, 2009 | 2004 Nissan Quest

2 Answers

2004 Nissan Quest began shaking while driving then


SOUND LIKE FUEL PUMP.SCAN IT TO MAKE SURE.IT ALSO COULD BE FUEL PUMP RELAY OR FUSE.

Aug 10, 2009 | 2004 Nissan Quest

2 Answers

2004 nissan quest idles rough when van is stopped


Have 2004 Nissan Quest. After 40 mph Van runs rough and there is a loud rattleing noise that sounds like an old 4 bbl carb waaaah, but ther is no code

Aug 14, 2008 | 2004 Nissan Quest

2 Answers

Programming nissan Quest Remote control


I have a used Nissan Quest 1999 that Remote Control does not work . How can I program it?

Jun 29, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...