Question about 2002 Dodge Intrepid

2 Answers

Trouble starting my 2002 Dodge Intrepid

There have been times recently that my 2002 Dodge Intrepid won't start. It cranks over but just won't start. Sometimes it's just for a couple tries but yesterday I sat in a parking lot for about 45 minutes trying to start it. I thought that the battery would go dead before it started. It finally started and I got home. Like I said, this has been happening for a short time but it has never taken that long to start. Does any one have any info on this or has any one had a similar problem?

Posted by on

  • n_avem Jan 17, 2009

    dodge intrepid wont start after replacing heat blower control module. It has sparks, has fuel. mistery? or an electronic build in factory defect. I found out a lot of people with "dodge wont start after repair". found no solution.

  • gerd55 Jan 31, 2009

    I took mine to the dealer and they couldn't get any code failures from the computer. The mechanic said he had seen this before and suggested replacing the camshaft sensor. I had them do that. It seems to have fixed the problem.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try to fix the crankshaft sensor . That should fix the problem if not, next thing camshaft sensor. Then after that if no codes are coming up with a check engine light on. If the car is still running try some B12 cleaner that you put in your gas tank to clean out the engine and intake a bit. I have a 1996 ES 3.5 and I replaced the crankshaft sensor and it did the trick.

Posted on Jan 31, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

It could be a number of things. i'd go with the easiest fix first. check your air filter, then check spark plugs, then fuel filter. replace as necesary. good luck

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 3.6 Dodge intrepid won't start after changing battery and driving 15 miles


Make sure battery has a full charge and battery connections all good. If it cranks good but won't start, have a helper crank it while you check for spark at the plugs. If spark everywhere, use a gage and check proper fuel. Also, check fuel injector pulse. Do testing with engine cranking.
Any applicable trouble codes?
Sometimes when battery voltage is lost some modules may have a problem, including your security system, but, you said you have already driven it. Your charging system work ok?

Dec 15, 2016 | Dodge Cars & Trucks

1 Answer

Dtc Code P2314


2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

1 Answer

Check engine light flashes 9 times and car want start?


You need to get the OBD2 scan on the car to give you the codes. See if you can barrow one if not you will need to buy one. it will give you all the trouble codes for the car.

Apr 20, 2014 | 2002 Dodge Intrepid

1 Answer

2002 DODGE INTREPID 2.7, HAVE TO PUMP TO START, ONCE STARTED WILL NOT REV UP WITHOUT CUTTING OUT. FOUND DATE ON VALVE COVER 06-18-03 IF ENGINE HAS BEEN SWAPPED COULD IT BE CRANK SENSOR?


Sounds more like fuel pump. No residual pressure for start up and high resistance in motor windings to keep it pumping.
Get a pressure tester hook it up to schrader valve on fuel rail before cranking and measure residual pressure. Next crank engine and let it run and see what running pressure is. Compare it to spec's.
Quest way to check pump is to put key in ignition turn just to on position .You should hear the pump buzz.

Aug 09, 2010 | 2002 Dodge Intrepid

1 Answer

Vehicle Stalls


you should have engine light on and engine codes
if its the cam or crank sensors, shouldn't be the starter i would start with the ingition switch.

May 28, 2009 | 1999 Dodge Intrepid

1 Answer

2002 Dodge Intepid engine change now it wont start


how long ago did dealer do the job, if recently I think they should feel some obligation to assist you.

Dec 04, 2008 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...