Question about 2002 Land Rover Freelander

Open Question

2003 Freelander no sound comming from Audio System

There is power to the audio system, the digital display works but no sound. all other controls apear to work ok just no sound

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: 2005 Range Rover HSE - Random Radio / CD Problems

I have an 05 hse with the same issue, prought it to an electrical specialist who went in the boot and unkinked the infrared wires from all components, it worked for about a month and a few days ago it started again,when you say you "deoxed" the bluetooth harness....do you mean the nokia brain in the left rear boot or the cell phone dock in the front center console??? I have an appointment with the dealership tommorow and i hope they find the WIRING issue instead of trying to have me buy $5000 in new computers that wont fix the problem,its a common issue in this model with the logic 7 just wish someone who has already cleared this hurdle would post a solution:(...I will keep everyone updated

Posted on Mar 08, 2010

  • 1 Answer

SOURCE: how can i find a

How can i disable the security code of 2000 landrover freelander

Posted on Mar 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 2002 Nissan altima and DA display on the radio is working but no sound


Hi candy Love , I love that name ! What Altima ? S ,SE or SL

AUDIO

Revision: May 2004 2002 Altima

AUDIO PFP:28111

System Description EKS002KQ

BASE AND MIDLINE SYSTEM

Refer to Owner's Manual for audio system operating instructions.

Power is supplied at all times

 through 15A fuse [No. 31, located in the fuse and fusible link box]

 to audio unit terminal 6.

With the ignition switch in the ACC or ON position, power is supplied

 through 10A fuse [No. 6, located in the fuse block (J/B)]

 to audio unit terminal 10.

Ground is supplied through the case of the audio unit.

Audio signals are supplied

 through audio unit terminals 1, 2, 3, 4, 13, 14, 15, and 16

 to terminals + and - of front door speaker LH and RH

 to terminals + and - of rear door speaker LH and RH

 to terminals + and - of tweeter LH and RH.

BOSEĀ® SYSTEM

Refer to Owner's Manual for audio system operating instructions.

Power is supplied at all times

 through 15A fuse [No. 31, located in the fuse and fusible link box]

 to audio unit terminal 6, and

 to Bose speaker amp. terminal 1.

With the ignition switch in the ACC or ON position, power is supplied

 through 10A fuse [No. 6, located in the fuse block (J/B)]

 to audio unit terminal 10.

Ground is supplied through the case of the audio unit.

Ground is also supplied

 to speaker amp. terminal 17

 through body ground B117.

Audio signals are supplied

 through audio unit terminals 1, 2, 3, 4, 13, 14, 15, and 16

 to speaker amp. terminals 23, 24, 25, 26, 27, 28, 29, and 30.

Audio signals are amplified by the speaker amp.

The amplified audio signals are supplied

 through speaker amp. terminals 2, 3, 9, 10, 11, 12, 13, 14, 15, 16, 18, and 19

 to terminals + and - of front door speaker LH and RH

 to terminals + and - of rear door speaker LH and RH

 to terminals + and - of tweeter LH and RH

 to terminals + and - of subwoofer LH and RH.

SPEED DEPENDENT VOLUME CONTROL (MIDLINE SYSTEM AND BOSE SYSTEM)

If activated, the radio output volume will be automatically adjusted to compensate for increased driving noises

at higher driving speeds.
The radio receives a vehicle speed signal from the combination meter, and selects the output volume.

Feb 01, 2015 | 2002 Nissan Altima

1 Answer

Code for radio/cd honda civic 2003


Try to locate the unique code number that will unlock the theft-protected audio system on your 2003 Honda Civic. It probably was imprinted on an anti-theft identification card that you should have received when you acquired the car. The code was printed on a document that came with your owner's manual packet

If you do not have the code, you will need to track down the audio system's serial number. In the case of the 2003 Honda Civic, finding the serial number may require seeking assistance from a Honda dealer. The dealer should be able to determine the audio system's special code number so you can reset the radio. With some newer Honda Civic models, the serial number can be retrieved electronically from the radio.

If you are able to locate the serial number of your 2003 Honda Civic's audio system without a dealer's assistance, you can obtain the special code by going online to the Honda Web site. You must first provide specific information to prove you own the car. For instance, you will need the Civic's vehicle identification number, or VIN, and the audio system's serial number.

When you know what the audio system's special code number is, use the preset buttons on the car radio to punch in the digits. This should reset the audio system, enabling you to resume using the radio and the CD player.


Read more: How to Reset Radio Information on a 2003 Honda Civic ' eHow.com http://www.ehow.com/how_6056947_reset-information-2003-honda-civic.html#ixzz1FGPZq81d

Feb 28, 2011 | 2003 Honda Civic

1 Answer

2002 TL WONT TACK RADIO CODE


Your vehicle's audio system will disable itself if it is disconnected from electrical power for any reason.
To make it work again, you must enter a specific five-digit code in the preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.
You should have received a card that lists your audio system code number and serial number. It is best to store this card in a safe place at home. In addition, you should write the audio system's serial number in this owner's manual.

If you should happen to lose the card, you must obtain the code number from your dealer. To do this, you will need the system's serial number.

If your vehicle's battery is disconnected or goes dead, the audio system will disable itself. If this happens, you will see ''CODE'' in the frequency display the next time you
turn on the system. Use the preset buttons to enter the five-digit code.
The code is on the radio code card included in your owner's manual kit. When it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for 1 hour before trying again.

If the code card is lost, your dealer can access your code with your radio's serial number. To access the serial number, turn the radio on. It must display ''CODE'', then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release. The serial number will appear in two sets of four digits (information obtained from Owners Manual).

Hope helps (remember to rate this).

Oct 21, 2010 | 2003 Acura 3.2TL

1 Answer

My radio works but the digital image on my radio is messed up.


most likley the digital display has failed,and in most cars without a integrated audio/climate control system, its cheaper to go aftermarket than to have the radio repaired,, time to get the ipod stereo!

Apr 11, 2010 | 2003 Pontiac Grand Prix

1 Answer

2006 Honda Accord EX replace the battery now radio won't work


Your car’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.
You should have received a card with your manual(if you have one) that lists your audio system’s code number and serial number. If you don't have the card, you can get the code number from your Honda dealer, but to do this, you will need the system’s serial number, or maybe the accord's vin number.
You will see ‘‘Code’’ in the frequency display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.

This is probably the case. Hope this helps.

Oct 31, 2009 | 2003 Honda Accord

1 Answer

How do i shut off the security system after replacing the battery


On EX, SE, and EX V-6 models
If you are talking about the overall security system in which the horn sounds and a combination of headlights, parking lights, side marker lights and taillights flash (and may also involve your radio), the alarm continues for two minutes, then the system resets. To reset an alarming
system before the two minutes have elapsed, unlock either front door
with the key or the remote transmitter. I believe this works when a battery has been changed.
If you are talking about the radio, Your car’s audio system will disable
itself if it is disconnected from electrical power for any reason. To
make it work again, the user must enter a specific five-digit code in the
Preset buttons. Because there are hundreds of number combinations
possible from five digits, making the system work without knowing the
exact code is nearly impossible.
You should have received a card that lists your audio system’s code
number and serial number. It is best to store this card in a safe place at
home. In addition, you should write the audio system’s serial number in
this Owner’s Manual. If you should happen to lose the card, you must
obtain the code number from your Honda dealer. To do this, you will
need the system’s serial number.
If your car’s battery is disconnected or goes dead, or the radio fuse is
removed, the audio system will disable itself. If this happens, you
will see ‘‘Code’’ in the frequency display the next time you turn on the
system. Use the Preset buttons to enter the five-digit code. If it is
entered correctly, the radio will start playing.
I hope this helps you.

Oct 23, 2009 | 2002 Honda Accord

1 Answer

Stereo not working, and slidind doors either. need fuse diagram


Visual Inspection Chart Mechanical Electrical
  • Audio unit
  • Digital audio compact disc changer
  • Antenna and two-piece antenna cable or electric antenna
  • Radio speakers mounting/speaker cones
  • Capacitive suppression bond wire and radio receiver hood bonding strap
  • Central junction box (CJB) fuse:
    • 6 (15A)
    • 2 (25A)
  • Ignition switch
  • Circuitry
  • Audio unit
  • Video system


Audio Unit Self-Diagnostic Mode
NOTE: To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM).
  1. To enter the following tests, depress the desired preset button while in the speaker walk-around test or while in the audio unit self-diagnostic mode.
  1. To exit the audio unit self-diagnostic mode, turn the ignition switch or the audio unit off.
  1. If the concern remains and the fault is not detected, proceed to the Symptom Chart to continue diagnostics.
  1. The audio unit self-diagnostic mode has five tests available:
    • Preset button 1 = Audio internal/external SELF TEST. This test is an on-demand self-test. If SELF FAIL is displayed, press TUNE > to scroll view the DTCs stored. Refer to the audio unit Diagnostic Trouble Code (DTC) Index. If the system is OK, SELF PASS will be displayed.
    • Preset button 2 = View/clear continuous DTCs. NO DTCS is displayed if no DTCs are retrieved. If DTCS FOUND is displayed, press TUNE > to view the DTCs retrieved. Refer to the audio unit Diagnostic Trouble Code (DTC) Index. To clear all DTCs, press the EJECT button. DTCS CLEAR will be displayed.
    • Preset button 3 = SIGNAL TEST. This test measures the average strength at the current tuner setting.
    • NOTE: Always DOCUMENT, CLEAR and CARRY OUT the audio unit on-demand self-test again.
      Preset button 4 = Software configuration level. This test queries each audio unit system controller for its software configuration level. SOFT LEVELS will be displayed upon completion of the query. Press TUNE > to scroll view the software configuration version level.
    • Preset button 5 = DISPLAY TEST. This test will light all the audio unit display segments for five seconds. When the test is complete, DISPLAY TEST is displayed on the bezel.

May 25, 2009 | 2002 Ford Windstar Cargo

1 Answer

Changint time on digitalclock


If the vehicle is not fitted with a
touch-screen, adjust the clock using the
audio system controls as follows:
1. Press and hold MODE until TA
VOLUME
is displayed.
2. Repeatedly press MODE until
CLOCK SET is displayed.
3. To select 12 or 24 hour format, press
the seek up/down keys.
4. Press MODE to continue
5. If 12 hour is selected, use # to denote
AM or PM.
6. Use the key pad to enter the time in
four digit format.
7. To exit, press and hold MODE until
the display reverts to audio mode.

Nov 04, 2008 | 2003 Jaguar S-Type

Not finding what you are looking for?
2002 Land Rover Freelander Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...