Question about Cars & Trucks

1 Answer

No spark I seem to have no spark from the coil, is there a way of testing to see if the coil is faulty?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 1,007 Answers

If each plug has multiple coils then remove a coil from another plug and test that one. If it sparks, then you know the issue isn't the wiring, but the original coil.

Posted on Nov 04, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda odessey engine code p3100


There is no p3100 code!!

I think you copied this wrong. the code is p0301, which is a common one.

The P0301 code means that the cylinder 1 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 1. If the problem persist more tests needs to be done to diagnose problem.

Possible causes
- Faulty spark plug 1
- Clogged or faulty fuel injector 1
- Faulty ignition coil 1
- Fuel injector 1 harness is open or shorted
- Fuel injector 1 circuit poor electrical connection
- Ignition coil 1 harness is open or shorted
- Ignition coil 1 circuit poor electrical connection
- Insufficient cylinder 1 compression
- Incorrect fuel pressure
- Intake air leak

Most likely cause:
Faulty spark plug 1 or Faulty ignition coil 1 (Ignitor coil)

Either are easy fixes. Start with a new spark plug. If the problem continues replace the coil. Pic below. new about $30-$40.





25668053-d0khtfozkoi42lnxngz2bi0n-3-0.jpg

Apr 27, 2015 | 2005 Honda Odyssey

1 Answer

P0302 code


A code P0302 may mean that one or more of the following has happened:Faulty spark plug or wireFaulty coil (pack)Faulty oxygen sensor(s)Faulty fuel injectorBurned exhaust valveFaulty catalytic converter(s)Running out of fuelPoor compressionDefective computerPossible Solutions
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Mar 08, 2012 | Cars & Trucks

1 Answer

Engine swings but does not start


Your testing so far seems to exonerate components #1 to #5, and #13.
Since you've already replaced a number of parts to address the problem, I thought I should try to be comprehensive:

Priority Action Part Type Cause
1 Inspect Ignition Switch - Improperly Connected or Faulty Ignition Switch.
2 Inspect Battery - Battery Discharged or Faulty.
3 Inspect Battery Cable - Coroded, Broken, Shorted or Poorly Connected Battery Cable.
4 Inspect Starter Solenoid - Starter Solenoid Faulty.
5 Inspect Starter Motor - Starter Motor Faulty.
6 Inspect Wireset - Worn or Damaged Spark Plug Wires.
7 Inspect Ignition Coil - Faulty Ignition Coil.
8 Inspect Distributor Cap - Loose, Cracked or Worn Distributor Cap.
9 Inspect Spark Plug - Incorrectly Gapped or Fouled Spark Plug(s).
10 Inspect Distributor Cap and Rotor Kit - Loose, Cracked or Worn Distributor Cap, or burned rotor contacts.
11 Inspect Fuel Tank - Fuel Tank Empty.
12 Inspect Carburetor - Worn, Faulty or Damaged Carburetor.
13 Inspect Fuel Pump - Faulty Fuel Pump.
14 Inspect Fuel Pump Strainer - Fuel Pump Strainer Clogged.
15 Inspect Fuel Filter - Fuel Filter Clogged.
16 Inspect Air Filter - Air Filter Clogged.
17 Inspect Fuel Injectors - Fuel Injectors Clogged/Inoperative
18 Inspect/Test PCM - Powertrain Control Module (Computer) defective - sending incorrect ignition/timing signals to fuel injectors
19 Inspect Fuel Rail - Fuel Rail leaking/broken causing inadequate/low fuel pressure.

Use a HEI (High Energy Ignition) tester to see if you have spark to your sprak plugs - if not, suspect Ignition Coil, Distributor Cap, or Distributor Rotor.

Nov 21, 2011 | Cars & Trucks

1 Answer

When i start my 2001 kia optima my car putters. i changed my bad o2 sensors. but not sure what the problem is. and when i drive sometimes it jerks. what could the problem be


The spark and fuel system needs to be inspected.--------- The spark plugs are getting fouled or very loose, can cause sputtering problem.Inspect the spark plugs and coil packs.The spark plugs gets power from coil pack.If the spark plugs are very old and dirty, then it needs to be replaced.--------------- The **** problem also relates to faulty worn out spark plugs or clogged fuel filter or low fuel pressure or problem with ignition coil pack.----------- When coil pack stops giving power to spark plug the car will **** while driving.---------- So very first thing you get tested is spark plugs and ignition coil packs.If they are tested good, but looks very dirty/ worn out, that can also be the reason.----------- But if spark plugs and ignition coil tested ok and cleaned properly, but still same problem, then get fuel pressure tested.If fuel pressure is low, the fuel pump and fuel filter are the cause of problem.----------- ------------------ Also one more thing, " IS there check engine light coming ON dash" ? If yes, then get the car scanned at autozone service center.Its absolutely free to get car scanned at autozone.They do it for no charge.------- In scanning you will get error codes, as per error codes, it will point towards faulty part, causing this sputtering and jerking problem.----------------- But if there is no check engine light ion dash, then get the above mentioned possibilities checked.That will help.Thanks.Helpmech.

Aug 05, 2011 | 2001 Kia Optima

1 Answer

I had a cheek engin light on . I had it tested and #3 cilender eather the coil or spark plug is bad


We are assuming that your check engine light mean or advise one P0303 code; this means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #3.

A code P0303 may mean that one or more of the following has happened:
* Faulty spark plug or wire
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector
* Burned exhaust valve
* Faulty catalytic converter(s)
* Running out of fuel
* Poor compression
* Defective computer

Possible Solutions:
* If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
* If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Test it and send us news about your advance.

Feb 10, 2011 | 2008 Nissan Quest

1 Answer

2004 dodge intrepid.2.7 engine. #1 misfire.coil good.plug good. have not done a compression test yet. ( will soon) I cant get to the injector.how can i get i test the injector?I have a scan tool which...


Hi, if the injector is not on the data list of the scan result then you have no reason to try and test the injector which can be located with the help o the car user manual...
The cause of misfiring #1 cylinder may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

I will also strongly suggest you carry out the compression test........

Jan 30, 2011 | 2004 Dodge Intrepid

1 Answer

What should a multimeter read on a continuity test on the coil packs? i'm getting 1.9,1.7,1.7


The multimeter can read the resistance and if it is not open or shorted out, I'd say that your readings are in the normal range, comparing each resistance with each other + or - 10%.

I looked up the resistance readings on my online resource, but they did not list it specifically.
---
I looked up the following on autozone.com:

There are 3 dual-tower ignition coils that are part of the ignition control module (ICM). The ICM contains coil driver circuits that command the coils to operate. The Powertrain Control Module (PCM) controls each dual-tower ignition coil by transmitting timing pulses on the ignition coil control circuit to the ICM for the proper coil to enable a spark event.
  1. Inspect the spark plug wires for proper orientation.
  2. With the ignition OFF, remove the fuel pump relay.
  3. Crank the engine and test for a strong spark on each cylinder spark plug wire using a suitable spark plug tester. Ground the companion cylinder spark plug wire of each cylinder when it is tested.

    If a strong bright blue spark is present on all of the cylinders, remove and inspect all of the spark plugs for proper torque, proper gap, wear, damage, and fouling. Replace the spark plugs if necessary. If there is no spark on any of the cylinders, test the ignition voltage circuit of the Ignition Coil Module (ICM) for an open/high resistance or short to ground, or test the ground circuit of the ICM for an open/high resistance, or a faulty ICM. The wire circuit resistance should measure less than 3 ohms. If there is no spark on any of the cylinders, or spark is weak or intermittent, test the IC circuit for an open/high resistance, or a faulty ICM. The wire circuit resistance should measure less than 3 ohms. If spark is present on one or more of the cylinders, inspect and test the spark plug wires for arching, cuts, rubbing on other components, and proper resistance. If all tests are normal, then the system is operating correctly.
    ---

Oct 08, 2010 | 2000 Chevrolet Venture

4 Answers

I have a ford explorer 99 but it's giving a error code PO306 what do u think it is


It sounds like a misfire. Check spark plugs 5 and 6. It could be bad fuel, bad plug wire, or weak coil. Check the fuel injectors as well. Other possible causes could be an egr valve stuck open, vacuum leaks, low fuel pressure.

Feb 17, 2010 | 1999 Ford Explorer

1 Answer

Po308 code misfire #8 cylinder. How to fix? replace ignition module first? spark plugs were just done and seem fine.


Seems you may have answered your own question.

P0308 will normally be a coil failure but can also be a compression fault caused by a sticky lifter etc or a faulty, incorrectly gapped spark plug

It most likely be the coil but check the spark plug and run a compression test if you have the equipment, all bores should have equal PSi readings.

Or you could try moving the coil in cyl. 8 to see if the code moves to a different P030* code

Dec 06, 2009 | Dodge Durango Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...