Question about Ford Cars & Trucks

Open Question

My 2002 ford windstar shift lever is completely loose cant move the van how could it be fix

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2001 Ford Windstar Van- transmission

i have a 1996 wind star van the over drive light is flashing and it downshifts sometime it seems like it is in over drive when you take off. is there a censor on the transmission that needs replaced

Posted on Oct 16, 2008

Ad
  • 261 Answers

SOURCE: 97 FORD E250 VAN SHIFT LOCKED IN PARK

check the brake lights to see if they work ithey do then the problem is in the locking mechanism, however if the brake lights sont work then first check the fuse, check the wires and the connector that hooks up to the brake switch under the pedal and if it is dammaged repair as needed and if yo get the lights working yo have made the lock to work also!!

Posted on Nov 14, 2008

smartr10U
  • 1305 Answers

SOURCE: 1999 F350 crew cab 4x4 ford, gear shift lever

Ok ready to stand on your head under the dash?
It's doable... there is a flange connected to the gearshift lever under the steering column. If you remove the lower dash cover where the fuses are, you should be able to see it when you move the gear shift lever... look around on the floor of the truck to see if you dropped a star-headed bolt or two... these bolts worked loose on my superduty and made shifting very difficult..it was an easy fix... let me know how you do on it.

Posted on May 10, 2009

fingaz22
  • 1068 Answers

SOURCE: 2002 Ford Windstar Error Code P1131 And P1151

those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank 1 sensor 1 and bank 2 sensor 1. them most common cause for this is faulty o2sensors , bad gas and of a poor running engine. so if your car runs good (no misfire) and gas is ok then replace the o2sensor witch is the very most common cause.

Posted on Jan 28, 2010

Testimonial: " Help With Problem But Where Are These O2 Sensor"

  • 115 Answers

SOURCE: fusebox diagram for 2002 ford

Go to www.flmowner.com ,type in the year, make and model of your vehicle. Select "find my vehicle". Select "owner guide 1st edition". You will find the fusebox diagrams for your windstar starting on page 205. I hope this helps.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford windstar 2002 problems


that could mean that your water pump impeller is broken. when you press the gas the remaining piece of the impeller is pushing the water and it actually makes it to the heater core. at idle it isn't spinning fast enough. ask a local autoparts store if the impeller is made of plastic.

Apr 02, 2014 | 2002 Ford Windstar Cargo

1 Answer

1999 ford windstar automatic transmission van won't move when shifted into any gear. makes no noise or anyting , like it's in neutral.


its time to go to a transmission repair shop. transmission is one of windstars weak link, mine did it in just 76000 miles, my advice if you want it fixed dont buy used ****** you will just have the same trouble later, a new modified windstar ****** will by fine or have it fixed by a good transmission mechanic they will put in modified parts, they will offer a five year warranty on their work. and save.

Sep 30, 2011 | 1999 Ford Windstar

2 Answers

My shifter on my 98 windstar will not shift into reverse and is loose at the steering wheel. When i look under the van i can manually shift through all gears and reverse i think it has to do with the...


Your transmission is not performing properly. You need to have your transmission looked at by a professional. Your transmission can be further damaged if you drive on it futher. I recommend you get it fixed sooner rather than later. Hope this helps! Please rate 4 thumbs up!

Apr 18, 2011 | 1998 Ford Windstar

1 Answer

2004 ford windstar replaced gear shift sensor but does not engage however when i move the stick the doors lock and the back up lights com on when in reverse but van feels like its still in neutral do i...


sounds like your issue is either involving the torque convertor, or more than likely the transmission is at fault. your gear shift lever is actually mechanically linked to the trans, the gear position sensor would not cause the van not to move, sorry for the bad news!

Oct 25, 2009 | 2004 Ford Windstar

1 Answer

I have a 2002 ford windstar with 119506 miles on it and i was pulling out of an intersection and the van would not go it made a winding noise and when i put my foot down more it was barley moving could u...


it either blew the trans or more likely there is not fluid left in it. look for a huge leak such as a cooler line or front seal leak. that whine is bad,its the hydro pump in the trans burning up, dont slip the trans! itll take about 30 seconds of that and its fried

Aug 25, 2009 | 2002 Ford Windstar Cargo

1 Answer

2002 Windstar wont go into gear


These are common for the pump shaft splines stripping in the torque converter. The transmission will need to be removed to fix it. Before you condemn the trans, does the speedo move and the van doesn't or do you hear any grinding when you put it back into park? Or can you push the van in park (Broken CV shafts)?

Mar 28, 2009 | 2002 Ford Windstar Cargo

2 Answers

1999 F350 crew cab 4x4 ford, gear shift lever


Ok ready to stand on your head under the dash?
It's doable... there is a flange connected to the gearshift lever under the steering column. If you remove the lower dash cover where the fuses are, you should be able to see it when you move the gear shift lever... look around on the floor of the truck to see if you dropped a star-headed bolt or two... these bolts worked loose on my superduty and made shifting very difficult..it was an easy fix... let me know how you do on it.

Dec 06, 2008 | 1999 Ford F350 Regular Cab

2 Answers

Ford Windstar 1998


Need to check your trans fluid first. do this with van running and engine warm.

Aug 28, 2008 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...