Question about 1995 Isuzu Pickup

1 Answer

Where is the timeing marks at on a 1995 isuzu rodeo

Need help right away

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

If its a 2.6 4 cyl. set the crank pin up.....there is a keyway.....set cam mark down.....ready to fire on number 1....if u set cam mark to up position it will be ready to fire n number 4
hope ths helps

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im looking 4 the timming marks on the cam shaft and watever the gear is to the left o the crankshaft. Its on a 1995 Isuzu Rodeo 4 cyl 2.3 also need to know how to get it back timed


The best answer is to get a shop manual from auto parts store. The alignment is crucial so I would not want to trust someone's memory. You need a good picture.

Dec 15, 2014 | 1995 Isuzu Rodeo

1 Answer

1995 2.3L 4W ISUZU RODEO HOW DO YOU GET IT BACK IN TIME


Remove timing belt cover and the timing belt. Line up the cam gear timing mark with the mark that is behind it. Then, set the crankshaft pulley timing mark to zero degrees or whatever the book says. Then re-install the timing belt and re-torque the timing belt tensioner to the proper torque. Turn the engine one full turn, with a breaker bar and socket. Re-check the timing marks on the crankshaft and camshaft. Re-install the timing belt cover and everything else you took off to get to the belt. Be sure to torque the crankshaft pulley bolt to specs.

Sep 27, 2014 | 1995 Isuzu Rodeo

1 Answer

I have a Isuzu rodeo 1994 3.1 in I can't find the


The timing marks are stamped into the head and in the cam pulley, also on the crank and the case, find them and paint them white so you can see them, the new belts have the marks on the belt, they will line up, If they don't , you got it wrong, You can do this without spinning the cams or crank and losing the marks, as long as the belt marks line up, you will be all set. Put the pin in the tensioner before removing the belt. Did you change the water pump? And I think the engine is 3.2L. Get it in there and pull the pin, It should be right on. Turn over the engine by hand a couple times to make sure it comes around on the marks. If it is wrong, it will go about 11 or 12 miles, and you will need a new engine. Hope this helps.

Jun 04, 2011 | 1994 Isuzu Rodeo

1 Answer

Camshaft sensor went out on my 1995 isuzu rodeo, i just bought one, but cant seem to find out where it goes. Can i get help on this?


on the 3.2L its located right on the right front of the timing cover just behind large radiator hose

Aug 13, 2010 | 1995 Isuzu Rodeo

1 Answer

I need to find the timing (TDC) marks for my 95 isuzu rodeo. I had to replace the front main seal gasket. I had to pull the harmonic balancer to get to the seal. I put everything back together & now...


There is no way that could happen unless you did not put the woodruff key back into the crankshaft recess and put crank pulley on random!!!

Apr 11, 2010 | 1995 Isuzu Rodeo

1 Answer

I need to find a diagram for a timing belt for a 1995 isuzu rodeo. I purchased the belt but am having trouble getting it placed on correctly.


We are talking about the Timing Belt and not the Drive/Surpentine Belt?

For the Timing Belt: CLICK on the following Link. It has all the Diagrams you will need for the Timing Belt.
http://www.2carpros.com/car_repair_information/year/1983/make/isuzu/model/pickup/1983_isuzu_pickup_timing_belt_diagram_marks.htm

For the Drive/Surpentine Belt: CLICK on the following Link. It has all the Diagrams you will need for the Drive/Surpentine Belt.
http://www.2carpros.com/car_repair_information/year/1995/make/isuzu/model/rodeo/1995_isuzu_rodeo_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 27, 2010 | 1995 Isuzu Rodeo

1 Answer

Replace timing belton 1995 isuzu 3.2 V6


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1995/make/isuzu/model/rodeo/1995_isuzu_rodeo_timing_belt_diagram_marks.htm

Nov 23, 2009 | 1995 Isuzu Rodeo

1 Answer

Radio installation


1995 Isuzu Rodeo Stereo Wiring Constant 12V+ Red/White Switched 12V+ Brown/White Ground Black Illumination Green/Red Dimmer n/a Antenna Right Front Front Speakers 4" Dash Left Front (+) Blue/Yellow Left Front (-) Yellow Right Front (+) Green/White Right Front (-) Gray/White Rear Speakers 4" Side Panels Left Rear (+) White Left Rear (-) Red/White Right Rear (+) Orange Right Rear (-) Black/Orange

Dec 30, 2008 | 1995 Isuzu Rodeo

2 Answers

How do you open the hood to a 1995 isuzu rodeo


pull the latch on the left side of the steering wheel column.  if it soed not pop, go pull up on the hood hard and pull the lever again. it should pop the second time. then reach up under the hood and disengage the safety hook

Dec 09, 2008 | 1995 Isuzu Rodeo

Not finding what you are looking for?
1995 Isuzu Pickup Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...