Question about 1997 GMC Jimmy

2 Answers

97 gmc jimmy codes

Hoe do i find out what the trouble codes are. is it as simple as a couple of key turns like some cars

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Try cycling the key off and on three times ... with the final motion on.... count the times the check engine light flashes (if it does).... those are your codes.... if you can't get your codes that way and happen to live in the states... go to your local autozone.... my understanding is that they will read them for free

Robert

Posted on Jan 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

No,you will need an OBDII code reader like the ones you'll find here
http://www.diydiagnostics.com/
hope this helps...........thanks for choosing fix ya!

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 97 gmc jimmy willnot start cranks up but wont start


could be the fuel pump which is located in the gas tank. You should be able to hear it when you turn the key on.

Apr 25, 2014 | 1997 GMC Jimmy

1 Answer

Blinkers not working 97 gmc jimmy


You may need a voltmeter to check if power is going into the turn signal switch. Start at the turn signal fuse and see if power there, with key on.

Jan 12, 2014 | 1997 GMC Jimmy

1 Answer

I have a 97 gmc jimmy and we puta head gasket on and now there isn't any power after the starter? Anyone have any ideas?


Starter relay is in the middle of the firewall near the top of the firewall. I would check connections and /or replace that relay. They are very inexpensive.
Also, you could turn the key on and run a jumper wire from power to the starter solenoid and see if it starts. You can easily get to the solenoid though the right wheel well. Be careful not to ground the wire by mistake.

Jan 21, 2013 | 1997 GMC Jimmy

1 Answer

My '97 Jimmy misses when I accelerate and lunges when stopped.My fuel injection was cleaned and fuel filter was changed last week and my service engine light is still on.


My 96 started out that way, then got worse and worse. Got all kinds of trouble codes,like multiple misfires, maf sensor bad, map sensor, O2senssor rich. Turned out to be the distributor cap and rotor. Rotor had carbon track on the backside. Other than that, they looked perfect. New ones solved the problem and all the trouble codes went away. All that misfiring was causing all the sensors to throw false codes. I figured out I needed to look for something not so obvious when the $100 maf didn;t change a thing.

Jan 03, 2011 | 1997 GMC Jimmy

1 Answer

How to remove oil pan on 97 jimmy 4wd


i dont understand how it is so simple i have all of the bolts out and the oil pan is still stuck? like there is more holding it but i have all the bolts out of it?

Apr 23, 2010 | 2001 GMC Jimmy

3 Answers

Radio Locked 1999 GMC Jimmy


If you press and hold the 1&4 or 2&3 buttons together for 6 - 9 seconds a 3 digit number appears (xxx). Hold the AM FM button a second 3 digit number appears (yyy)

Call 1800-537-5140 when recording starts press 106010*xxxyyy* and it will give you your code

My 97 jimmy wont give me my second 3 digit code but good luck

Dec 20, 2008 | 1998 GMC Jimmy

1 Answer

1997 GMC Jimmy turn signal switch


I have a 97 Sierra and similar issues. I changed the wiper control board that is under the hood/on the firewall/ mounted on the wiper motor.

Oct 04, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...