Question about 2001 Chrysler Town & Country
The P0755 means Shift Solenoid "B", hope this can help you!
AK500 key programmer
Posted on Nov 03, 2012
Testimonial: "hope you can help solve this of my chrysler town and country van 2001 model,error engine light p0755 diagnose transmission shift solenoid b,my question is this transmission getting worse,even my van i using until this time,hope this problem can help me."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be the gas cap. Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister. I have 2003 T&C and had the small leak and large leak codes. I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser. I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe). The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.
Posted on Jan 24, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
Pull the headrest all the way up. Where the two rods go down into the seatback you will see a small hole in each of the plastic mounts. All you have to do is push a paper clip into the hole and lift theb headrest up to remove it. Do this for each rod. To reinstall just push the rods back in. Thanks for visiting I hope I solved the problem for you.
Posted on Nov 20, 2010
Tips for a great answer:
Apr 23, 2015 | 2001 Chrysler Town & Country
Jan 20, 2015 | 2010 Chrysler Town and Country
Mar 24, 2014 | 2001 Chrysler Town & Country
Jan 13, 2014 | Chrysler Cars & Trucks
Oct 01, 2011 | 1996 Chrysler Town & Country
Apr 25, 2011 | 2005 Chrysler Town & Country
Jan 23, 2011 | 2008 Chrysler Town & Country
292 people viewed this question
Usually answered in minutes!