Question about 2004 Ford Freestar

1 Answer

Changed water pump car wont start may need to reset but how

I think we need to reset the system on the car but don't know how we changed the water pump everything lights up on car when we try to start it but it won't crank...Need help

Posted by on

  • acreate Jan 05, 2009

    Thanks, we will try that...we have tried everything it is so weird, all the lights come on,radio etc...the battery and alternator are fine, the car just won't turn over so we will try your solution....Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

I would look around for loose vaccum lines and to find out where the crank sensor is and make sure the drive belt is on right

Posted on Jan 04, 2009

5 Suggested Answers

  • 21 Answers

SOURCE: engine won"t turn over(crank)

I ran into this once also, and I remember that I just disconnected the battery for about half an hour.

Try that if you haven't already.

Posted on Apr 25, 2009

ZJLimited
  • 17970 Answers

SOURCE: im planning on buying a grand cherokee. the guy im

Make one selft-scan for someone problem; after, RESET the codes.

See you later with more news.

Posted on Jan 24, 2010

Testimonial: "this was very helpful n giving us a place to start before purchasing n taking to a shop. thanks for the info "

  • 7353 Answers

SOURCE: help my camaro wont crank ive tried everything

You cant reset it. So it cranks but wont start? V8? 6Cyl? You cant just guess and throw parts on it hoping you fix it. Have it towed to a shop and diagnosed.

Posted on May 12, 2010

SOURCE: changed water pump timing belt

I would assume the valves are up against the pistons

Need to get a copy of the correct belt timing procedure
& start over

Posted on Jul 18, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed fuel pump and pump is working but car wont start


I think you may need to reset the computer. I know this is an issue with changing the fuel pump out in Honda's and other cars.

Feb 08, 2014 | Volkswagen Beetle Cars & Trucks

1 Answer

Antifreeze leaking onto belts don't know where it is coming from. Is it the water pump or the water outlet? changed the hoses


What you need to do is pressurize the cooling system, then you should be able to see where the leak is coming from.....There is a tool that does this pressure test.

Mar 30, 2012 | 1995 Mercury Villager

1 Answer

1999 mercury marquis wont start, turns over fine, think its the fuel pump, not sure.


Check the fuel pressure at the injector rail.Or hook it up to OBD II code reader, which should give the average fuel pressure.
Do you hear the fuel pump run for a second or two when you first turn the key to `ON' position? That means your fuel pump reset hasn't tripped(for collision purposes,but sometimes needs reset).
When all else fails, go to Ford and they will hook it up for 50-70 bucks and tell you what is wrong.
If you can give more details, post back and let us know. don-ohio (:^)

Nov 02, 2011 | 1999 Mercury Grand Marquis

1 Answer

Drove truck to school everything great, i leave school and it dies and try to get it going and it acts like its got water in my gas or something .it starts then it wont drive i took of fuel filter and...


Sounds like the fuel pump has gone out. Test fuel pressure to see. Think it needs about 45 to run right.

Most people take the bed off to replace pump. Don't but an Airtex.. Best to buy GM OEM. I know from having to do several Airtex's twice.

Sep 15, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

Do you know if there is more than 1 air valve in the fuel line.... i found 1 just above the oil cap. my boyfriend ran the car out of gas, we put 1/4 tank in and it still wont start. you can spray starter...


Don't know if this could be it,but check in the trunk for the inertia switch.I think it's in the trunk,anyway.The red button might have popped up and need depressed to reset it to power the fuel pump. don-ohio

Sep 11, 2011 | 1997 Ford Taurus

1 Answer

2003 chevy suburban z71 shows car with padlock just changed fuel pump wont start


If you disconnected the battery to change the fuel pump and did not disable the anti-theft feature first, you now know why it wont start. Check the owners manual if you have it, or contact a GM dealer to get the system reset.

Aug 03, 2011 | 2002 Chevrolet Suburban

1 Answer

316 m reg, ran out fo fuel put some petrol in and now it will not start don't think the fuel pump is working is there a reset for the pump


Un firtunetly pumps with some age on them tend to lock up when ran dry. try hitting the bottom of the gas tank about in the center or where you think the pump may be. The vibration usually knocks them loose and they start pumping again. You might have to smack the tank 2 or 3 times. You will still need to replace the pump because they can continue to lock everytime you shut the car off. And eventually you wont be able to smack the tank to get it going.

Jul 03, 2011 | BMW 318 Cars & Trucks

1 Answer

1998 lincoln continental wont start security light on


It is theft detected. definitely security system. take to dealer or call dealer for code to reset.

Feb 19, 2009 | 1998 Lincoln Continental

1 Answer

Water pump and timing belt


how do you know when the timing belt has broken? how do you know when the water pump is bad? will the engine start?

Jul 15, 2008 | 1997 Honda Civic

Not finding what you are looking for?
2004 Ford Freestar Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...