Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Nov 02, 2012

Long brake pedal travel on a 2007 mkz - Lincoln Cars & Trucks

5 Related Answers

Frank Chen

  • 330 Answers
  • Posted on Jul 27, 2008

SOURCE: Brake pedal goes too far

You have to check your master cylinder, pump your brake several times and hold it, see if is going down to the bottom, if does, the master cylinder is wrong, check the brake pressure hose, maybe you have some air in your brake lines, be sure you have enough brake fluid

Ad

AzVip

  • 114 Answers
  • Posted on Mar 22, 2009

SOURCE: Hard Brake pedal in '93 Dodge Caravan

Is the engine also running poor such as tries to stall or the RPM is high? Is there an unusual suction type sound? Check the vacum hose to the brake booster, if loose, cracked or a hole in it.
This is about a 1/2" diameter hose and goes to the booster from the engine for power brake assist.

Anonymous

  • 79 Answers
  • Posted on Mar 22, 2009

SOURCE: excessive brake pedal travel

pump the brakes a few times they should stiffen right up

Anonymous

  • 20 Answers
  • Posted on Oct 03, 2009

SOURCE: squishy brake feel with long pedal travel but brakes stop the car

You have to remove the air trapped in the hydraulic system. Look at change of brakefluid in a repair handbook and perform it as described.

Useful to change the brakefluid at least once every five years anyway.

Testimonial: "Saved me time, money and most importantly, perhaps my life!"

A

Anonymous

  • Posted on Apr 26, 2011

SOURCE: How do you get the rear caliper to retract when

Need to buy a tool at auto parts store ,that
fits the rear caliper piston,so you can turn it
clockwise. ( Looks like a cube) $8.00

What your doing is actually turning in or back -- the
parking brake adjuster.

The tool will be turned with a 3/8" extension & ratchet

Opening the bleeder valve will help as you have to
push the piston in as well as turn it in.

Need to bleed all 4 wheels every 2 years anyway.

You may have to file the tool to get a combination
that will work
I had to do that with the Lincoln LS

Once the pads are on,you ratchet up the parking
brake,bringing the pads in contact with the rotors.

Press the brake pedal a few times before going into
rev or drive, to seat pads

The notch on the caliper piston, goes to the top
so the pin on pads will fit

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2007 Lincoln MKZ gear shifter is getting stuck in park and comes out after trying a little while, not every time but its increasing more and more.

On your vehicle there is a shifter interlock system ,it's a safety feature . Doesn't allow shifter to be put into gear if your foot isn't on the brake pedal .
Visual Inspection Chart Mechanical Electrical
  • Transmission shift cable
  • Manual control lever
  • Transmission control module out of adjustment (6-speed transaxle)
  • Fuse
  • Connections
  • Wiring harness
  • Brake pedal position (BPP) switch
  • Shift lock actuator
  • Transmission control (TC) switch (MKZ)
Diagnostic Trouble Code (DTC) Chart
DTC Component Description Condition Symptom Action B2572 Brake Shift Interlock Brake Shift Interlock Output Circuit Failure The associated circuitry connected to the smart junction box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. Brake shift interlock is inoperative or does not operate correctly. Go To Pinpoint Test A . Symptom Chart
SYMPTOM CHART Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry open/shorted
  • Fuse(s)
  • Stoplight switch
  • Go To Pinpoint Test A .
  • Shift interlock system does not release/lock correctly
  • Shift lock actuator
  • INSTALL a new selector lever assembly. REFER to Selector Lever in this section.
PINPOINT TEST A: THE SHIFT INTERLOCK SYSTEM DOES NOT RELEASE/LOCK CORRECTLY Test Step Result / Action to Take A1 TEST THE BRAKE LIGHTS
  • Apply the brake pedal and view the brake lights.
  • Do the brake lights illuminate?
Yes
GO to A2 .

No
REFER to Section 417-01 . A2 TEST SHIFT INTERLOCK ACTUATOR POWER CIRCUIT
  • Disconnect: Floor Shifter Harness Connector C3245.
  • Key in ON position.
  • Vehicles equipped with a 3.0L or a 2.3L engine, measure the voltage between floor shifter harness connector C3245-1, vehicle harness side and ground, while applying the brake pedal.
    s7s~tr~en~file=n0042138.gif~gen~ref.gif
  • Vehicles equipped with a 3.5L engine, measure the voltage between floor shifter harness connector C2096-1, vehicle harness side and ground, while applying the brake pedal.
    s7s~tr~en~file=n0053796.gif~gen~ref.gif
  • Is the voltage greater than 10 volts?
Yes
GO to A3 .

No
REPAIR the circuit. TEST the system for normal operation. A3 TEST SHIFT INTERLOCK ACTUATOR GROUND CIRCUIT
  • Key in OFF position.
  • Vehicles equipped with a 3.0L or a 2.3L engine, measure the resistance between floor shifter harness connector C3245-4, vehicle harness side and ground.
    s7s~tr~en~file=n0042139.gif~gen~ref.gif
  • Vehicles equipped with a 3.5L engine, measure the resistance between floor shifter harness connector C2096-5, vehicle harness side and ground.
    s7s~tr~en~file=n0053797.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
INSTALL a new selector lever. REFER to Selector Lever in this section.

No
REPAIR the circuit. TEST the system for normal operation. Don't try to force it , you'll break something !
0helpful
1answer

My 2007 Lincoln MKZ will not go in gear . Everything else is working fine what could be the problems?

Most newer vehicles have a safety feature which prevents shifting out of park if the brake pedal is not engaged. If you are holding the brake pedal down and still won't shift into gear, this pedal sensor could be malfunctioning.
0helpful
1answer

I have a Lincoln mkz 2008. sometimes I have to double pump my breaks to put my car in drive

Replace the brake pedal sensor, located under the dash on the brake pedal arm. It may be defective, causing the transmission linkage to remain in the locked park position until you jolt it by double pumping the pedal.
0helpful
1answer

Lincon MKZ 2007 FWD slight vibration in gas pedal during shifting

what you need to do is flush the trans completely, put in new oil it should fix the problem. Change the transmission filter also, God-Bless and hope this helps you!
0helpful
2answers

Gear shift lever gets stuck in park when engine is running and brake pedal is depressed

shift actuator not working. see if you here click sound coming from lower section of steering column.check fuses.vehicle with key on first position, not running, you should be able to move shifter into neutral, then start vehicle..
1helpful
1answer

2007 MKZ key turns but shift lever stuck in park

Next to the shift lever is a small square cap flush with the console pry it up and out with a small screw driver. Under the cap is a button, push it down and put the car into gear. This will get you going, finding out the cause is another problem, a blown fuse can cause the problem or a broken neutral safety switch (located above the break pedal) or as in my case none of the above, it just kept working after that. Good luck.
1helpful
1answer

How do you get the rear caliper to retract when installing new brake pads? On a Lincoln 2007 mkz?

Need to buy a tool at auto parts store ,that
fits the rear caliper piston,so you can turn it
clockwise. ( Looks like a cube) $8.00

What your doing is actually turning in or back -- the
parking brake adjuster.

The tool will be turned with a 3/8" extension & ratchet

Opening the bleeder valve will help as you have to
push the piston in as well as turn it in.

Need to bleed all 4 wheels every 2 years anyway.

You may have to file the tool to get a combination
that will work
I had to do that with the Lincoln LS

Once the pads are on,you ratchet up the parking
brake,bringing the pads in contact with the rotors.

Press the brake pedal a few times before going into
rev or drive, to seat pads

The notch on the caliper piston, goes to the top
so the pin on pads will fit
8helpful
2answers

Where can i find my 2007 lincoln mkz default door code

There is a tag to the right side of the fuse box behind the emergency brake lever. You will have to remove the plastic cover by sliding the latch back first. I just purchased a 2007 MKX and had the same issue. The 5 digit code was there and worked perfectly.
0helpful
1answer
Not finding what you are looking for?

770 views

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...