Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Nov 02, 2012

Rover 25 rear seat removal - Cars & Trucks

2 Related Answers

Anonymous

  • 95 Answers
  • Posted on Sep 20, 2009

SOURCE: How do i solve rim leak on a rover 25

If the problem is sealing around the bead, the tire needs dismounted and the corrosion cleaned off of the wheel. In extreme cases I've had to use a thin layer of spray gasket maker to fill in some rough areas. If the problem lays in the wheel where the tire does not contact, some grinding and RTV can fix it, also with the tire dismounted.

Ad
alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Feb 02, 2012

SOURCE: I do i remove my centre rear seatbelt on a rover 25

nice motor this little car hope its a diesel as they run forever ,right rear middle seat belt just lift the back seat and their bolted to the floor ,simple 17mm spanner if i remember rightly

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Range rover rear seats

Just purchased a 2011 Range Rover... can't get my rear seats to recline when I push the lever
0helpful
1answer

Rear seat removal rover 75 54 plt

Hello,

It is late I know, but i just wanted to remove the rear seat today
i tried many ways .. here is what i got at the end , which i found it the easy way.

https://www.youtube.com/watch?v=VXigPl-FUsg

hope you get some help
0helpful
1answer

Rover 25 heater

Bad/cracked/leaking heater core. Needs to be replaced. Make sure to keep a close eye on antifreeze level until it's fixed.
1helpful
1answer

How do i remove the boot trim on a rover 25

You don't remove the boot trim.
The pipe runs through the black plastic rubber tubing, top left of the boot hatch, and then runs to the base of the wiper.
Pull off the black plastic cover, at the bottom of the wiper arm, and try the rear washer again.
If nothing comes out, then the prob is most likely is that the water tube has snapped, inside the black rubber tubing at the top of the hatch.
Good luck!
0helpful
1answer

Installing range rover evoque dog guard VPL VS0082

You have a job on your hands. Remove rear plastic boot protector then unscrew the chrome bolts into the floor. Next remove side panels and ensure you disconnect light on right and 12v socket on left.
The side panel metal brackets are a breeze, but to fit the lower brackets one left and right and one central require you to unscrew the seat brackets into the chassis. I cant see how they can be got at nor can I remove the rear seat uprights to access them so, ive just bothered with the upper brackets. Doesnt move and took me half the time :)
0helpful
1answer

I do i remove my centre rear seatbelt on a rover 25

nice motor this little car hope its a diesel as they run forever ,right rear middle seat belt just lift the back seat and their bolted to the floor ,simple 17mm spanner if i remember rightly
0helpful
1answer

How to replace a rear seat belt for a land rover discovery

You have to probably remove the rear seat to get to the bolts and basically just remove bolts, replace seat belt and reinsert bolts and tighten.
0helpful
1answer

How do I swap the front seat bolsters over in a series 2 land rover discovery?

You should be able to detach the front seat bolsters by removing the seat, undoing the trim and flipping the seat over. Underneath there are a load of clips that when released should free the seat off. There are 12 hog rings holding the cover to the cushion. The rear edge is bonded to the seat frame though.
0helpful
1answer

Can child seats be used on 3rd seat row in a landrover Disco 2

in briten the child seats must fase forwards unless there made to fase the other way,,,, so its a big NO,,, never ever put children in the rear side seats of any 4x4 its just not safe for them to be there,
4x4s can and do turn over so easly in a crash and in the rear side seats there going to get realy hurt, however there your children
2helpful
1answer

'04 LR Freelander - rear seat belt tensioned/stuck

un bolt to remove tension, pull some of the belt out and rebolt.
Not finding what you are looking for?

234 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...