Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to take the door panels off. remove all screws you will have plastic pieces called christmas trees that hold the panel in place. there is a tool for this you can pick it up at Napa for cheap this will allow you access to the inner space of the door un plug plugs to power switchs and the rod to your door catch hardeware you then can remove panel completely to get access to mirror assembly. installation of door panel is in reverse
Posted on Aug 31, 2008
the Glass element or the glass and backing assembly? if just the glass it is just glued on, Scotch two sided tape works as well, if the Glass and backing fixture it just snaps in and out of the drive motors.
Posted on May 28, 2009
If its a power mirror there is more thing you will have to remove to get to the wires but if not there is a screw on the corner piece on the inside of the door. just pull the screw out and the bolts (3) that hold the mirror on are behind it. If it power then you will have to remove the door panel to access the wiring to disconnect it
Posted on Jun 21, 2009
SOURCE: Remove and replace side mirror
take off inside panel of door...there are 3 nuts holding the mirror on...simply remove the 3 nuts and replace....pay attention to the brittleness of the inside panel....be gentle
Posted on Aug 09, 2009
SOURCE: installation of side mirror
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Mar 05, 2011 | 2000 Ford Taurus
Dec 12, 2010 | 2001 Ford Taurus
Feb 02, 2010 | 1996 Ford Taurus
Aug 27, 2009 | 1998 Ford Taurus
Jun 21, 2009 | Ford Taurus Cars & Trucks
May 20, 2009 | 1995 Ford Taurus
Mar 20, 2009 | 2003 Ford Taurus
Mar 12, 2009 | 2000 Ford Taurus
Jan 21, 2009 | 2005 Ford Taurus
Aug 31, 2008 | 2001 Ford Taurus
182 people viewed this question
Usually answered in minutes!