Question about 2000 Ford Taurus
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool
Posted on Jan 28, 2009
yeah you need a bar with a 1/2 square on it, if none available it takes 2 people to get it on with out the tool. but can be done. get the belt routed while one person keeps the belt in place the other needs to pull on the belt and slide it over the last pulley. I know it is a pain i have had to do 3 this way.
Posted on May 01, 2009
It is not printed on a sticker on the cross bar in the front of the engine compartment where the hood latch is?
Thanks for your interest in FixYa.com
Posted on Mar 02, 2010
Tips for a great answer:
Dec 03, 2015 | Mazda Cars & Trucks
Feb 19, 2012 | 2002 Mercury Sable
Mar 02, 2010 | 2000 Ford Taurus
Jul 25, 2009 | Ford Taurus Cars & Trucks
May 30, 2009 | 2001 Mercury Sable
Jan 16, 2009 | 2000 Ford Taurus
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: