Question about Cars & Trucks

Open Question

How many quarts of oil do you put in your 1990 ford probe 3.0 v6 when its almost empty

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 158 Answers

SOURCE: Capacity of fluid for a transmission of a 2006 F150 5.4L Truck. Book says 13.9 quarts I emptied 3-4 quarts.

you must have just drained the pan? There is much more held in the converter. The one I am rebuilding this week is an 05 and doesn't have a drain plug on it (not many do anymore). A flush is the only way to change it all out. 13.9qts sounds like the total amount if the trans was completely empty, converter and all

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1992 Toyota Camry V6 how many litres oil


Can't give you an exact number but I can tell you how to find out. I will asume that you are changing you oil and filter? After putting the oil plug and filter on put three quarts of oil in and start engine; after oil light goes off, turn engine off and let set for about 5 minutes, then check oil; if it is not on the low mark of dip stick add another quart, start engine, stop engine, let set for a couple of minutes and check again. By now you should either be at or above the low line and just add enough oil to top it off at the full line. I would guess that about 4 1/2 to 5 quarts is what you will need. Hope this helps,
P. Ford

Jan 10, 2013 | 1992 Toyota Camry V6

2 Answers

How do I change the oil for a 1993 ford probe?


Jack the car up find the oil releas bolt which will be on the bottom of the oil pan. put an oil catcher undernieth that bolt then take it off. wait about 3 minutes for all oil to leak out reinstall bolt and put new oil in the motor.

Jan 28, 2011 | 1993 Ford Probe

1 Answer

Just change transmission filter in 95 ford windstar put 5 quarts in stick still read empty. how much fuild does it take?


IF YOU REPLACE THE TRANSMISSION IT TAKES ABOUT 8 QUARTS. 3 IN THE CONVERTER AND 5 ON THE PAN. NORMALLY IT ONLY TAKES 5 IF YOU CHANGE THE OIL AND FILTER.. MAKE SURE THE STICK IS GOING ALL THE WAY... YOU MUST ALSO CHECK OIL WHEN ENGINE IS ON.. NOT OFF...

Dec 15, 2010 | 1995 Ford Windstar

1 Answer

How much oil do i need to put in a 1990 ford thunderbird lx 3.8 L


4.5 quarts with filter change. Run engine until it warms a bit and the oil pressure indicates a readout. Let it set a while and recheck the level .

Sep 11, 2010 | 1990 Ford Thunderbird

3 Answers

Im doing my brothers oil. how much do i need, 1994 grand cherokee


i buy the 5 quart jug i drain it all fill it with about 4 quarts start it let it run for about 30 seconds then shut off wait 5 minutes check oil fill as needed. then remember how many quarts it took. there 4.0 v6 is usualy 5 quarts. but do as stated to be for sure. then you have the empty jug to put used oil in for recycle.

Apr 23, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Oil for trans in a 1990 ford


Manual, Auto??? what do you want to know???

Jan 01, 2010 | 1990 Ford F150

5 Answers

I don't know how much oil i need for an oil change


With oil filter you'll need 5 quarts. After changing oil and filter run briefly and check for leaks. Shut down the engine and check oil level is correct.
I hope this may have helped,
Tom

Oct 18, 2009 | 1993 Ford Probe

1 Answer

Added 3 quarts of oil now white smoke is coming from exhaust


you have to drain the excess oil i would suggest a complete oil change and oil filter. TAke off spark plugs put some wd 40 on each sparkplug hole start the car without any sparkplugs on ir. Reolace sparkplugs with new ones and the car should run again. I would also suggest to check for faulty sparkplug wires and bad air filter. While you are at it go ahead and check fuel filters.

Jul 14, 2009 | 1996 Ford Probe

2 Answers

93 ford probe


It still may be the oil pump. At an idle it may not be putting out enough pressure to move the oil, but when you start driving, it turns faster and builds more pressure.

Jul 07, 2009 | 1993 Ford Probe

1 Answer

1990 Ford Probe 3.0 V6. i need to know the firing order and the order on the distributer


firing order is 1-2-3-4-5-6

hopefully the distributor picture transfers!

b5469a.gif

let me know...i have pasted before and have cehcked back and not seen the pictures...let me know if you got it by responding to your post



good ;luck!



Jun 09, 2009 | 1993 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...