Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does the book say 6 quarts? I would put in 5, then run it, then let it settle for a couple minutes, then check it again. The book should be right. That would probably include changing the filter also.
Posted on Jun 27, 2009
I believe that in 1990 the 2.0L was replaced by the 2.3L. The 2.3L was offered in two versions. Standard and turbo. However since there may well have been 2.0L available in 1990 I included both capacities.
Before you add any new oil, fill the new filter up first.
After you have secured the oil filter and refilled the rest of the oil remove the coil wire to prevent the engine from starting.
After that turn the engine over for a count of 10 to 15 seconds. Now reconnect the coil wire and start the car.
This extra step is Critical and Necessary to prime the oil system. If the engine is started with an unprimed oil system and an empty oil filter the turbo will not receive oil for 10 to 15 seconds after start up. Some scientist have speculated that this was in fact an unlikely cause of the last great extinction event that occurred somewhere else. ":->
Hope this helps and good luck.
Posted on Oct 22, 2009
Tips for a great answer:
Sep 11, 2011 | 2004 Ford F150
Sep 21, 2010 | 1996 Oldsmobile Aurora
Sep 01, 2010 | 2005 Chevrolet Silverado 2500HD 2WD
Jun 13, 2010 | 2001 Ford F250 Super Duty Super Cab
Feb 25, 2010 | 1991 Ford F150
Feb 17, 2010 | 1996 Oldsmobile Aurora
Nov 17, 2009 | 1989 Ford Crown Victoria
Oct 20, 2009 | 2000 Ford Contour
50 people viewed this question
Usually answered in minutes!