Question about 1990 Plymouth Voyager

Open Question

Where should the timing marks be placed on a plymouth 3.0 engine

3.0 engine V6

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 5763 Answers

SOURCE: Where are the timing marks on a Mitsubishi 3.0L V6

If you would of gave me the year i could help,ill geuss its a 1994 voyager, most of these 3.0 mitts engines are the same, this will give you an idea of where to look, hope this diagram helps you.9b70552.gif

Posted on Jun 11, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On a 1999 Isuzu Rodeo 3.2 V6 DOHC If you put all timing marks together on engine and then put timing belt mark all together on the engine and rotate two rounds with crankshaft does all the marks come

Just the engine. The marks on the belt are to make sure the teeth are in the right place when replacing. It might come back in place on 4 turns of the crankshaft. I have never checked to see if the belt marks came back. But always check the timing marks themselves.

Hope this helps.

Nov 10, 2014 | 1999 Isuzu Rodeo

1 Answer

Timing Chain Marks Toyota V6 4 Liter

Before you remove any thing place the engine on no 1 firing on the timing mark on the bottom pulley. when removing any thing after that do not turn the engine or the cam shaft and every thing will stay in order.; You will probably see the position of the marks in this position.

Apr 02, 2013 | Toyota Cars & Trucks

1 Answer

Ignition timing 1996 dodge 3.9 v6

I found this web reference for a 2 year older Dodge that might help:
On 98 dodge dakota with 3 9 V6 how do set up the distributor
This web reference indicates a VAST difference between the V6 and you could be on the right track with your 180 degree comment:
"The V8 mark is 17.5┬░after TDC and the V6 mark is 147┬░ after TDC"
Good luck on your troubleshooting ... and kudos to take on an engine rebuild!

Jan 17, 2018 | Cars & Trucks

1 Answer

Where are the timing marks on a Mitsubishi 3.0L V6 (Plymouth Voyager). I can see the painted mark on the crankshaft pulley, but I can't find the timing marks anywhere around it.

If you would of gave me the year i could help,ill geuss its a 1994 voyager, most of these 3.0 mitts engines are the same, this will give you an idea of where to look, hope this diagram helps you.9b70552.gif

Jun 11, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

Timing belt broke and jump timing how do i get

If you have the harmonic balancer still attached you can align the timing marks with 0 degree to get the main block aligned. With the head removed you can turn the cam shaft till the number 1 valves are both closed and the number 3 exhaust valve is open. Take the time to inspect the valves as well. This vehicle did not come with no contact valves so when the belt broke it is possible the valves made contact with a piston and bent. I highly recommend you get the Haynes Repair manual on this vehicle from the local auto parts store as it has detailed instructions on how to get back to TDC if this happens. It also has Pictures on this. Because this belt goes around 3 timing marks aligning those after you have the pistons at TDC if you align the timing marks on the different sprockets/pullies the timing for teh valves will be correct.

Jan 25, 2010 | 2000 Plymouth Voyager

2 Answers

How do i replace the timing belt on my '94 Plymouth acclaim?

I did it twice and if you are fairly skilled it will take 4-6 hours, if you have the V6.
Here is the steps:
1. Move car to a place that can support a jack and engine stand.
2. Disconnect battery
3. Loosen wheel lugs on passenger side front tire
4. Jack car on passenger side to lift wheel of the ground
5. Put a block under the oil pan to support the engine
6. Block car frame on left side
7. Remove left front tire
8. Remove v-belt
9. Remove idler pulley
10. Remove and support air conditioner compressor
11. Remove PS pump if you have one
12. Remove motor mount on left side and vacuum / gas connections connected to mount ( mark bolts as to locations )
13. Remove metal plate on engine ( mark bolts as before )
Tricky bolts are on the PS pump (Remove them through PS pulley holes)
14. Remove 3 plastic covers over timing belt ( mark bolts as before )
15. Note timing marks on overhead cams and crank.If none, make some.
16. Ease pressure off timing belt tensioner
17. Remove belt and replace with new. Trick here is to make sure you get the belt notches lined up. Head cams will shift when you remove the old belt. Do not tighten the belt tensioner fully or it will not perform as designed, it should be snug but be able to move.
END... replace part is backward order and drive away !!!

Nov 16, 2009 | 1994 Plymouth Acclaim

2 Answers

1997 plymouth grand voyager v6 3.0L broken timing belt

I had the same thing happen, No, I was told this is not one of the engines that allows the piston to contact the valves. I replaced the timing belt 2 years ago and had no valve problems.

Sep 22, 2009 | 1997 Plymouth Grand Voyager

Not finding what you are looking for?
1990 Plymouth Voyager Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides