Question about Cars & Trucks
Do I only need the shock, the boot and bumper (like Kyb SB108), the top bushing (like Kyb SM5264) Can I reuse the old boot if it is not in a bad shape? Do I need to replace the spring isolators up and down?
That has sturts and you need to compress the spring. replace the sturt mounts
Posted on Nov 02, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
albert I need to tell you this buddy you have saved some money on the top I would call a uphostry shop in your area they will pick up car and repalce the top for you and the window needs to be seemed in there for safety reasons call one up I hate to tell you that but. Your better off having a specailty company do this if you need anything go to collsionrepairadvice.com
Posted on Mar 09, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
You are probably low on fluid.
Behind the rear seat is your motor/pump/reservoir combination.
With the top down, fill the reservoir to overflowing with ATF.
Cycle the system a few times and repeat.
Do this till the reservoir will take no more fluid.
Check the lines and cylinders for leaks. If you replace any lines or cylinders, always do them in pairs.
Karl at Topgunwon.com
Posted on Jan 25, 2010
Need to check the entire front end at a place like Sears or your dealership to determine what parts have excessive play in them. Sears doesn't usually charge for this service, in hopes that you would have them work on the car in the future.
Sometimes, the cv joints are worn and cause a rattle or clicking on turns. Also, the bushings for the lower control arms sometimes wear out causing a rattle or other noise that can be disconcerting.
When the strut bushings were replaced, were the other parts in the front end checked out?
Good luck on this repair.
Posted on Nov 06, 2010
Tips for a great answer:
May 26, 2017 | Cars & Trucks
Oct 05, 2013 | Chrysler Sebring Cars & Trucks
Sep 26, 2013 | 2005 Chrysler Sebring Sedan
Mar 28, 2013 | 2002 Chrysler Sebring
Sep 17, 2012 | 2005 Chrysler Sebring Sedan
Feb 17, 2012 | 2008 Chrysler Sebring
Feb 27, 2011 | 2002 Chrysler Sebring
Apr 10, 2009 | 2002 Chrysler Sebring
79 people viewed this question
Usually answered in minutes!