Question about Nissan Cars & Trucks
All three of my air knobs are stuck on different things temperature stuck on heat, speed is stuck on 1, and direction is stuck on dashboard.
Check the condition of the heater matrix valve under the dash board. Disconnect any motors or cable connections to it and try operating it by hand. If it is stuck, then replace it.
If not stuck, then check motor operation (if climate control model) or cable routing (if manual only).
Posted on Nov 02, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
After showing the dealership this site and the problems that others have had. I insisted that they take a look at it and solve the problem. FINALLY, they admitted that there are lights and that basically it is a pain to fix because they need to order a new module. After one day in the shop, I now have lights for the climate controls in my 2005 Jeep Grand Cherokee Laredo. Do not let them tell you that it only is an option with the Limited. It is just flat out FALSE. I was so frustrated with my dealership because this is shady if you ask me, but they did fix it free of charge. Do your research, call JEEP themselves, and provide the dealership with facts and they should fix it. It's ridiculous how much work I had to do to get them to admit that the Laredo also had the option, but it failed. Don't back down!!!!!!!
Posted on Feb 25, 2009
Go to Radio Shack and head to the back where they have the drawers with the LEDs and mini lightbulbs. Get the model no. 272-1140, mini lamp 1 3/4 hookup leads, 6V, 25mA. It costs about $1.49-$2. When you take apart the HVaC unit from the center console, there's two blue twist out plugs on the top near center right and left of the unit. Twist out the one on the side that has the light out. You'll need a small screwdriver to turn it loose. Study how the wires come out at one end of the blue tube and use a needle point plier to carefully untwist the wires and pull it out from the bulb end. Now insert the new bulb w/ the two wires throught the 2 small holes until they come out the other end. Your new bulb is not a perfect fit, so just push it as best you can. Carefully strip the plastic from the wire leads and wrap it in the same position and re-insert the blue tube-thingy back into its place. Turn on your lights and it should light up again. Hope that helps.
Posted on Mar 14, 2010
Tips for a great answer:
Jul 14, 2016 | 2005 Nissan Murano
Oct 28, 2013 | 2005 Nissan Sentra
Oct 08, 2013 | 2005 Nissan Sentra
Oct 05, 2013 | 2005 Nissan Sentra 1.8
Oct 15, 2017 | 2005 Nissan Sentra
Sep 10, 2011 | 2005 Nissan Sentra
Apr 30, 2010 | 2005 Nissan Sentra
Oct 20, 2009 | 2005 Nissan Sentra
Feb 13, 2009 | 1993 Nissan Sentra 4 Door
Oct 28, 2008 | 2004 Nissan Sentra
Jul 17, 2018 | Nissan Cars & Trucks
899 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: