Question about Cars & Trucks

Open Question

No codes for my paragon super 2 alarm was fitted 2002 want to reset to factory settings

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: FACTORY ALARM CAMRY TOYOTA 2002 WENT OFF WHEN i WAS DRIVING

If your remote is attached to the key in the ignition, it could have been bumped setting off the alarm. It is also possible for the lock button to be depressed and lock the doors, if you do not notice this and get out of the car........!

Posted on Jan 15, 2009

  • 59 Answers

SOURCE: Audi 2002 A6

Disconnect battery, or have dealer reset

Posted on Oct 09, 2009

  • 45 Answers

SOURCE: How do you reset a Dogde stratus 2002 factory

you will have to take it back to the dealer or to a shop that has the computer to acess that in the cars computer

Posted on Feb 18, 2011

alicantecoli
  • 22095 Answers

SOURCE: mazda 626 2002 wont start how do you reset the

try the spare key and problem is still the smae then its a dealer only job to set it all up again .sorry no quick fix with this sort of problem ,same software on this vehicle as a ford

Posted on Mar 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red alarm light stays on all the time. How do I get rid of this problem. Car starts no problem.


Hi

reset the car alarm with the default reset button

this should return it back to its default setting and turn the light off

25717970-m35oz4jvdfvvmght4a51n0jl-2-0.jpg
if its a factory fitted alarm consult manufacturers manuel

cheers

May 28, 2015 | Cars & Trucks

2 Answers

How do i disconnect the factory alarm on a 2002 mercury mountaneer


Hello. Alarms are a pain and can cause problems. The best thing to do is disconnect the fuse for the alarm in the fuse panel of the car, then the alarm will not work at all. Also becarefull that it does not cause problems to the car itself. Good Luck.

May 26, 2014 | 2002 Mercury Mountaineer

1 Answer

Reset factory alarm


run fault codes to find which sensor set off the alarm and killed the motor. If all ok then reset using a code reader.

Jan 22, 2014 | Dodge Stratus Cars & Trucks

1 Answer

Changed battery 2002 pontiac grand prix and alarm keeps going off and vehicle won't crank


its a security feature from factory. Gotta take it to a pontiac dealer and get the reset code.

Apr 20, 2013 | 2002 Pontiac Grand Prix

1 Answer

I bought a 99 expedition used... can i reset the keyless door entry pad?


I did a search and found this answer for you

Here is the location with full instructions:
The module is fastened to the top of the firewall directly behind the fuse box. It can be reached easily when you lie on your back in the driver floor area with your head close to the brake pedal. Just look up and you'll see it is clearly marked and the sticker also displays the factory-set access code for your truck.
Once you locate the module Make a note of the 5-digit access code on it.
Once you find the code, here is how to program it:

Now that you have the codes follow these steps to operate it completely. Remember from the driver's door, all operations must start with the 5 digit code first then follow it with the other options.
When pressing the controls on the keyless entry keypad, press the middle of the buttons to ensure a good activation.

IMPORTANT: Every step outlined in every procedure below must be done within five (5) seconds of the previous step.

REMEMBER THIS: If you try the factory code first and it doesn't work try to reset the keypad back to the factory code. Your personal code does not replace the factory-set code. So no matter what you can erase anyone's code back to the factory OEM setting. You can use either code to unlock your vehicle. Each time you set a new personal code the module will erase the previous one in favor of the new code.

Deprogramming (erasing) your own or pre-set personal code and leaving only the factory-set
1. Enter the factory-set code. (5 digit) from the sticker on the RAP module.
2. Press the 1/2 control.
3. Press the 7/8 and 9/0 controls at the same time.
The system will now only respond to the factory-set code.

Unlocking the driver's door (also disarms the perimeter alarm system)
1. Enter either the factory-set code or your new personal code. The interior lights will illuminate as soon as the first valid digit is pressed.

Unlocking all doors
1. Unlock the driver's door (5 digit code) then press the 3/4 control.

Locking the doors (also arms the perimeter alarm system)
1. Press 7/8 and 9/0 controls at the same time. The 5-digit code does not have to be entered.

Deactivating/Activating Auto lock
1. Enter the five (5) digit code.
2. Press and release the 3/4 control while holding the 7/8 control, then release 7/8.

Programming your own personal entry code
1. Enter the factory-set code (keypad will illuminate when first digit is pressed).
2. Press the 1/2 control.
3. Enter your personal 5-digit code.

Sep 12, 2011 | Ford Expedition Cars & Trucks

1 Answer

Mazda 626 2002 wont start how do you reset the factory alarm. the alarm is on when you try to start the car


try the spare key and problem is still the smae then its a dealer only job to set it all up again .sorry no quick fix with this sort of problem ,same software on this vehicle as a ford

Mar 22, 2011 | 2002 Mazda 626

3 Answers

2002 jaguar x-type alarm went off the other day while I was inside.When I shut the alarm off,I notice that the dashboards lights were on.I tired to start car but nothing happen,car isn't making a sound.Can...


most modern day car alarm systems started being factory fitted well over 10 years ago. The back up ni-cad battery inside the main siren will probably now be derelict and will cause many false alarms and immobiliser faults. In most cases, find out where the siren is tucked away( it will not be eady to get too because its a security device), and either replace the unit or ni-cads or just unplug it.
Always best to get car rescanned and clear dtc codes afterwards though too.
Note: keyfob batteries must be replaced annually on service date.
Cheers
Roger

Aug 03, 2010 | 2002 Jaguar X-Type

1 Answer

My battery died after recharging it the alarm buttom needs to be reset. I need to know where the reset buttom is


HI ! I haven' t researched your car for you just yet !

I thought Id quickly mention the common method for reprogramming your alarm & remote, If you still require assistance then just ask me and I will find more about your car :)

Common Methods for resetting/re-learning code

  • Factory Fitted Alarms/ Central Locking / remote comes on ignition key.

Insert ignition key , turn key to accessories / red , press & hold lock/unlock for a few secs.remove key,exit vehicle and try un/lock doors &/or alarm (Some models differ slightly & require engine on or manual use of door locks whilst resetting.

  • Aftermarket /Non-Factory / remote is separately operated
Most use a small back-up battery usually located within the loudspeaker/Alarm unit itself under the bonnet,
Remove this battery for a short period to reset the remote code


The access panel for the backup battery is never in an obvious place. look carefully :)

Jul 14, 2008 | Hyundai Sonata Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...