Question about Cars & Trucks

1 Answer

Dodge durango p0068 - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 54 Answers

Maf/map sensor throttle position correlation. actron computer hooked up to my durango gave me that code you can look them up

Posted on Nov 02, 2012

  • 2 more comments 
  • nopatience17
    nopatience17 Nov 02, 2012

    i had looked at the mass air flow sensor but i must of mistyped the code . t

  • nopatience17
    nopatience17 Nov 02, 2012

    i changed the maf/map sensor the tp sensor cleaned the throttle body and the code is still

  • nopatience17
    nopatience17 Nov 02, 2012

    appearing and the problem is still happening :(

  • nopatience17
    nopatience17 Nov 02, 2012

    do you of any other solutions that i could try?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0068 05 dodge durango how do I fix it


the most common for this code is throttle position sensor. follow your throttle cable to th engine and where it ends there will be a plastic piece with a wire conected to it directly across from it.

Nov 27, 2014 | 2005 Dodge Durango

1 Answer

P0123 and p0068 on a dodge durango 2007


P0068 - MAP/MAF Throttle position correlation
P0123 - Throttle positon sensor/Swtch A Circuit high input

Nov 07, 2013 | Cars & Trucks

1 Answer

2007 dodge durango p0123 and p0068


Code P0123-THROTTLE POSITION SENSOR 1 CIRCUIT HIGH and code P0068-MANIFOLD PRESSURE/THROTTLE POSITION CORRELATION. Without having the vehicle to properly test, and based on the information I have it sounds like your throttle position sensor has kicked the bucket. Replacing the sensor with a new one should solve your problem.

Nov 07, 2013 | Cars & Trucks

1 Answer

Get codes p0068 and p0108


codes p0068 refer to Manifold pressure sensor/mass air flow sensor--throttle position correlation--causes ---wiring---map sensor---maf sensor--mechanical fault.
code p0108 refers to manifold absolute pressure(map) sensor/barometric pressure (BARO) sensor--high input. causes ---wiring short to positive---map sensor---baro sensor---ecm.

Mar 28, 2013 | 2002 Dodge Intrepid

1 Answer

Idle fluxuates up and down, stalls, ck engine does not come on. took on a trip, put 900 miles, ck engine lite came on. read a code maf/map p0068 came up. what to do


replace the throttle position sensor when this sensor fails the idle speed fluxuates may cause the trans to shift oddly also

Aug 22, 2010 | 2004 Dodge Durango

2 Answers

I have a POO68 code, what does this mean? My Durango surges when idle and now when I'm driving i have quick loses of power like not getting enough fuel for a split second.


P0068 MAP/MAF Throttle Position Correlation

That means that the Manifold Absolute Pressure data doesn't jibe with the Mass Air Flow Sensor data and the Throttle Position Sensor Data.

So, any one of these three items may be the cause of your problem.

LIkely, that the TPS is not giving accurate data, but must read codes from the computer to determine any further conclusions.

Aug 21, 2010 | 2006 Dodge Durango

3 Answers

I HAVE A 2005 DODGE DURANGO CHECK ENGINE LIGHT IS ON TOOK IT TO AUTO ZONE THEY TESTED IT GAVE ME 2 CODES P0068 AND U1120 WHAT DO THESE MEAN? I WAS DRIVING AND THE CAR JUST STOPPED IT WOULD NOT ACCELERATE...


The code that tells why it died is the P0068 the throttle position sender. It can be bad but they usally last a long time. Other sensers can have troble and pull down the 5 volt reference signal and it'll make it appear that the senser is bad. You can pump the gas very quickly many times and make even a good car set this code. The computer sees a smooth signal from the senser it'll set things back to normal and it'll run just fine. The senser can be teated with an OHM meter center pin of the serser to one or the other outside termial. with the meter making a good conection. the senser should make a smottth change up and down and return to the same value as you started and never go off scale, the other terminal should do the same thing but only in the opasit direction. If it doesn't its bad but a new one stick in on fire it up and run down to the store and have them erease codes telling them you replaced the bad part and need to reset. Even then they sometimes won't do it as some stores have run into troblem with the wrong customer and they don't reset codes anymore. Then you'll have to go to a shop the has a code reader or a scanner to reset the light and or buy your own but about $80 is the cheapest you'll see for a reader that will reset (erease cdes) on OBDII vehicals. good luck

May 21, 2010 | 2005 Dodge Durango

2 Answers

Wife's durango is idling rough and running rough


With both codes pointing at TP sensor, I'd certainly take the time to replace it, as well as make sure connections to it are clean, and good. Chances are, you won't be able to take part back anyway. As far as exhaust goes, if it's leaking in the right places in may cause improper readings at sensors downstream, but if not obvious leak, I wouldn't be concentrating in that area right now.

Nov 01, 2009 | 2004 Dodge Durango

1 Answer

Not running properly


Hi
code P0068 = MAF/MAP sensorthrottle position correlation
code P0108 = MAP/BARO circuit high input
code P0441 = EVAP emission control system purge flow fault
take it infor a service
cheers Rob.

Jul 20, 2009 | 2003 Dodge Intrepid

2 Answers

Diagnostic codes


p0068 is Throttle Position sensor inconsistent with Mass Air Flow sensor.

couldn't find the other 2.

Jul 19, 2008 | 2003 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...