Question about Cars & Trucks

3 Answers

A little bump on my driver door probably like 1inch circumference how to fix it

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,109 Answers

I do not recommend you even attempt this repair, you will make it more noticeable than ever, trust me on this. Check with a local body shop and see if they can recommend a person who can take the dent out with repainting and no Bondo pastic body filler putty. These guys are very good and charge about $100.00 for a dent like this one.

Posted on Nov 01, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 32 Answers

I have seen that if u take some computer duster (yea in the spray can) turn it upside down and spray the ding with the cold mist it pops right out! I have just seen it google it and see for yourself

Posted on Nov 01, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 63 Answers

Take door card/panel of an tap out from the inside, dont use filler totally no need ,gentle tap from inside

Posted on Nov 01, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When hit a small bump driver window glass rattles terrible. How can I fix it?


-Need to re tight bolts that hold the glass inside the door.


Good Luck


Mai lor

Aug 13, 2015 | Cars & Trucks

1 Answer

My 1995 bmw 325ic drivers window oes up and down the last cm (1/4 in) on its own when I hit a bump or rough patch of road. Sometimes the road may be smooth or the car is turned off and parked and the...


10_30_2013_8_35_47_pm.jpgFrigging easy fix. Inspect your door striker latch, that is fixed to the car ( not on the door). It is the hook looking thing which works as a catch loop for your door. if you put your finger in it, you will feel a little button in there. This button is responsible for doing it. This means when you driving, button engages/disengages. Just apply a bit of epoxy on it, to make it fatter. this way it wont be affected by shaking .
Picture - this is what you looking for. It on the car, not the door. There is a little switch inside it.
If this doesnt help, google e36 window micro switch. cheers.

Oct 19, 2013 | 1995 BMW 3 Series

1 Answer

Window wont raise


If its automatic, and all other windows raise with the button panel on the drivers door, then your problem is the motor within the door that raises or lowers the window. Easy quick fix.

If manual, the window probably got stuck and is jammed up within the door and needs to be bumped or put back on the track.

Jun 07, 2012 | 2006 Dodge Stratus

1 Answer

1997 vw cabrio driver door does not turn on dome light. Passenger side works fine. How do I troubleshoot and fix?


Check the switch in the door-jam. Little black plunger that pushes against door when closed, you'll probably find your driver doors switch is stuck in/or broken.

Jan 08, 2011 | 1997 Volkswagen Cabrio

1 Answer

Left side drivers auto window will not rolldown


  • Remove the door panel's Phillips screws from the arm rest and the screw in the door handle. Remove the plastic cover concealing the mounting surface for the outside mirror. Remove the window switch by prying it forward and up with very little pressure. Disconnect the electrical connector. Remove any screws around the circumference of the door panel if any.
  • Grab the door panel at the bottom and lift it up to release the hooks on the lower part of the door. Tip the bottom of the door panel outward a little and push up to release the top of the door panel where it is hooked on the top ledge. Disconnect all electrical connectors on the door panel. Remove the panel.
  • Reach inside the access hole to remove the electrical connector to the window motor. Remove the bolts holding the motor to the door. Remove the screws holding the window motor to the regulator barrel.
  • Install the new motor into the barrel of the regulator. If it does not want to line up with the splines, lower the window slowly and the gear will turn and the motor will line up. Install the screws holding the motor to the regulator. Bolt the motor to the door with the bolts. Install all components in reverse order of removal.


  • Dec 07, 2010 | 1999 Ford Windstar

    1 Answer

    90km/hr and above creates a strong vibration from the rear. pls what could be the cause of this and pls what could be the solution. thanks.


    Sounds like a tyre problem. Visually check rear tyres for tread depths and run your hands over the flat circumference of the tyre and feel for bulges or bumps. If ok then they probably require balancing, check to see if any of the lead weights have fell off recently!

    Aug 10, 2010 | BMW 528 Cars & Trucks

    2 Answers

    Front driver door rattles and the door open light comes on


    You will have to adjust the door lock catch which is fitted on the body , loosen the two screws and push it a little inwards , close the door after adjsuting and see if it rattles , if so repeat the adjustment.
    Please also check the door hinghes of they are ok! Probabely it may have some play if so thn you will have to replace them.
    Hope this helps!

    May 12, 2009 | 2000 Nissan Xterra

    1 Answer

    How to remove the front door driver side pannel / molding?


    Hi Leon, I have a E34 1995 5 series and had to take door cards off. They're predominantly held on by plastic button clips around the edge/circumference of the door card HOWEVER there is a couple of screws hidden, 1 is behind the chrome door pull/lever a little round plastic cover hides it the other is behind the top of door handle maybe on yours behind door mirror electric adjuster button. one scew is philips the other Torx when pulling the card off the clips try a large flat/wide implement to prise it away as you may breaks some of the clips (£2/3 eBay) One more thing the door handle locates into a grip from behind you'll need a long screwdriver to push the tang up to release it. All the above should be well similar to your model. Oh! nearly forgot remember to unscrew/take off the door pin that goes up and down when locked/unlocked
    Good luck!
    Paul 'W'
    Onyer~EDson(:0)~[><

    Dec 04, 2008 | 2001 BMW 5 Series

    2 Answers

    2002 Chrysler T&C sliding door won't UNLOCK w/ Switch or Key FOB


    the other locks work correctly.

    quick fix is to clean the contacts that the door makes when you close it. there are contacts on the door pillar (probably look like little copper circles) on the door itself there will be some spring loaded contacts... make sure they work freely and are clean.

    Robert

    Sep 08, 2008 | 2002 Chrysler Town & Country

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    66 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...