Question about Chevrolet Cars & Trucks

1 Answer

How to drain radiator 2000 s10 chevy 2200

Where is the drain

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 2 Answers

You could just take the bottom hose off.

Posted on Nov 01, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 68 Answers

SOURCE: 2000 chevy s10 ex cab 2wd has leaky lines by

These are oil cooler lines and there are 2 sets of 2 and should be replaced, Fairly easy but messy. If one blows apart you run the risk of causing severe engine damage.

Posted on Mar 01, 2010

  • 22 Answers

SOURCE: What is the alternator output

Any alternator should put out between 13.4 to 13.7 anything above will destroy your battery. anything below and when you turn on your accessories will drain your battery

Posted on Jan 24, 2011

ldtrisch
  • 83 Answers

SOURCE: i need to find a

Hope this helps!!!
ldtrisch_4.jpg

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheres the radiator plug for a 2002 Chevy S10 truck 4x4


Cassie, open the posted link for picture and location of plug.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Drain Coolant On GMC Jimmy or Chevy Blazer With 4 3 Liter V6 Engine

Mar 06, 2016 | Cars & Trucks

1 Answer

2000 chevy blazer won't get over 2200-2300 rpms and has whistle


kinda sounds like the catilist in the converter is bad and the exhaust cant get out

Oct 14, 2012 | Cars & Trucks

1 Answer

A diagram of the flushing of a radiator and block of a chevrolet blazer LS 2000


Theres no such thing as a diagram, here are the draining instructions, hope this helps...
  • 1-Place a large drain pan beneath the radiator drain plug. The drain plug is located on the passenger side at the very bottom of the radiator on the engine side.

  • 2-Make sure the engine is cool. Open the hood of the truck and remove the radiator cap.
  • 3-Loosen the drain plug. On the 2000 Blazer, the drain plug is a wing-nut type of plug. Twist it with your fingers until the coolant begins to drain.

  • *To flush the block, once you have drained the radiator, run the engine for a bit untill the temp gauge goes up to normal, then the coolant will have been evacuated from the block. DO NOT leave the engine on, once it reaches normal temp, (this will happen quick) turn off right away, otherwise you'll be forking out a few hundred $$$ to fix the worped heads.
    4-Tighten the drain plug with your fingers once the coolant has drained fully from the radiator. Remove the drain pan and dispose of the used coolant properly.
    Some service stations will take and recycle your used coolant.
    Hope this helps...



  • Read more: How to Drain a Radiator From a 2000 Chevy Blazer ' eHow.com http://www.ehow.com/how_6357264_drain-radiator-2000-chevy-blazer.html#ixzz1VS4RBufX

    Aug 19, 2011 | 2000 Chevrolet Blazer

    1 Answer

    What is the alternator output current on a 2000 Chevy S10 pickup with a 2200 SFI 4 cyl engine?


    Any alternator should put out between 13.4 to 13.7 anything above will destroy your battery. anything below and when you turn on your accessories will drain your battery

    Jan 24, 2011 | Chevrolet S 10 Cars & Trucks

    1 Answer

    How to replace harmonic balancer 1993 2.8L chevy s10 6 cyl


    drain radiator and remove, remove all belts, remove outer pulleys from balancer then remove big center bolt from balancer ,make sure you use puller made to remove the balancer you can rent them at your local auto zone 

    Mar 07, 2010 | 1993 Chevrolet S-10

    2 Answers

    I have a 2000 s10 pickup 2.2. No heat.


    all chevys do that same thing the only thing i can say is put a small temp in the thermostat

    Feb 11, 2010 | 2000 Chevrolet S-10

    2 Answers

    Flush a radiator S-10 p/u


    i hate myself removing those drain plug i had a couple break on me i always remove thethe lower radiator hose try removing it at the water pump less danger to break the radiator
    remove hose put it down and everything will come off thanks pierre

    Jan 10, 2009 | 1998 Chevrolet S-10 Pickup

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    65 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...