Question about Cars & Trucks

Open Question

What does airbag code b0014 mean for a 2010 chevy aveo

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2004 chevy aveo radio code

if you have the manual then look in the index of it and look for radio and it should be in there

Posted on Apr 05, 2010

  • 108 Answers

SOURCE: 2004 chevy aveo

There is only 2 options.

1. Your radio code is in your paperwork for your car (Its on a hard plastic card) Find it.

2. Take your registration to Vin and Ser Number for your radio to your local dealer.

These codes are a guarded secret and no one code fits all.


Hope this tip helps guide you in the correct direction to solve this problem.

Posted on Apr 11, 2010

Testimonial: "as your information was very helpful but I dont have the paperwork or card and dealer want $75.00 to fix problem. thanks very muvh."

emissionwiz
  • 75817 Answers

SOURCE: Chevy aveo error codes. I have a check engine light on.code p2135

P2135 Throttle Position Sensor (TPS) Property Malfunction, remember this is not a car that is built by GM it is a Korean import.

Posted on Jun 07, 2010

  • 5370 Answers

SOURCE: how to reset airbag light

When the car's computer sees a problem with the airbag system, it disables the airbag so that it can't accidentally deploy. It also turns the light on the dash on so that the driver knows that there is a problem with the airbag system.
The only way to turn the light off is have a repair shop or dealer fix the problem with your airbag system and clear the trouble codes.
The air bag light is on because there is a problem with the air bag system. Until the problem is fixed the light will remain on. When the problem is fixed the light will reset itself.

---------------
The light is on because there is error code set in the computers memory.The car needs to be scanned.This will let you know what the error code is, once the error code is retrieved, it will point out what is causing the light to come on. --------- It can be faulty seat sensor or air bag switch or the switch wiring.That light is indicating to get the car scanned.--------- ----------- The car has to be scanned at dealer.Because in case of reset, it can be done at dealer only.-------- An electronic test can be run to determine the cause of this light, only the dealer has the right test equip to do it. I would not play around with this system, it can be very dangerous if it goes off without any warning.----------- I suggest get it inspected by the dealer.The problem is sensor or switch.But inspection will confirm.----------- This should help.Thanks.Helpmech.

Posted on Jul 09, 2011

momma_french
  • 1 Answer

SOURCE: airbag light stays on...2008 chevy

I have a 2008 Aveo and my airbag light has been on for almost a year. I refuse to pay dealer $80 just to tell me why it's on then have to pay them again to fix it. I heard that the sensors under the pass. seat can come unplugged, so my husband unplugged them and plugged them back in and it still the light is on. This is sooo frustrating....I really just want to reset it...anyone know how??

Posted on Feb 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep blowing the ems1 fuse in my 2010 Chevy aveo. My car turns over a couple times then blows the fuse. Help please?!?!


Might have a shorted circuit in the starting system. Good idea to also check for codes in the ECM. If any present, may help in pinpointing the problem.

Dec 23, 2016 | 2010 Chevrolet Aveo

1 Answer

How do I fix a Service Airbag Light on my 2010 Chevrolet Malibu when scantool does not communicate with the car.


Chevrolet Airbag Light MOT FAIL How To Fix - YouTube

? 3:49
https://www.youtube.com/watch?v=au-3OSjDXfM
Oct 1, 2013 - Uploaded by OBD Diagnostics
SRS Airbag Fixing - very easy to do the tool is here ... 2004Chevy Silverado service air bag message troubleshoot PART 1 - Duration: 4:09. by ...

Airbag Light Service Resource ' What Your Airbag Light ...

www.airbagsolutions.com/light.aspx
ASA 06/2010 ... The airbag light is an indicator lamp on the dashboard to alert the driver (or passengers) to any ... Some vehicles require a special "scanner" or airbagscan tool to reset the light. ... My car was in an accident, the airbag did NOT deploy, but my airbag light is on. What does that mean and how can I fix it?

Code B0081 - service air bag lite on - Chevy Malibu Forum ...

www.chevymalibuforum.com/forums/showthread.php?t=11116

Sep 15, 2012 - 10 posts - ‎6 authors
2010 Malibu ltz ... 3 days ago car would not start- dead battery- son jump started it and got it going- now the SERVICE AIR BAG lite is on. ... The dealer with his scan toolholds all the cards when it comes to the air bag system. ... so as soon as I fix the tension sensor, the PPS code will clear and then so will ...

service air bag light? - Pontiac G6 Forum



Dec 16, 2015 | 2010 Chevrolet Malibu

1 Answer

Why won't it downshift or shift into 4th?


2005 Chevy Aveo - engine light and hold lights flash - Fixya

www.fixya.com/.../t1361856-2005_chevy_aveo_engine_light_hold_ligh...
Dec 11, 2008 - 2005 Chevy Aveo - engine light and hold lights flash Yesterday I had my ... When I started the car to come home they started flashing again.

Chevrolet Aveo Transmission Problems - Car Forums at Edmunds.com

forums.edmunds.com > Chevrolet > Chevrolet Aveo

Sep 23, 2010 - 30 posts - ‎19 authors
Next time it jumps out of gear to push the onstar button and have it towed to .... to either start in 3rd gear (absolutely no power from a cold start until .... The car has beenstuck in park in both situations, level ground and ... My automatic 2005 Chevy Aveo LS requires T-IV Automatic Transmission Fluid (GM pt.

Nov 14, 2015 | 2005 Chevrolet Aveo

1 Answer

I HAVE A 2010 CHEVY AVEO,And the airbag light stays on.Does my car need service or can I turn it off myself


airbag needs service can be a fuse ,wiring problem or sensor check fuses first

Aug 12, 2015 | Cars & Trucks

1 Answer

How do I repair code P2176 on a 2010 Chevrolet aveo


Time for a tune-up. I recommend the chevy dealer.

Oct 19, 2014 | 2010 Chevrolet Aveo

2 Answers

Air bag code B1378 2008 chevy aveo


You could clear the code with a scanner, but its possible the sensor for the driver side bag is faulty.

Jun 29, 2013 | Cars & Trucks

1 Answer

2009 Chevy aveo code P0171


code po171 in chevrolate aveo 2010

Dec 12, 2012 | 2009 Chevrolet Aveo

1 Answer

2009 chevy impala left front side deployment loop resistance B0014 above threshold


the following link covers yours reqest The driver frontal loops 1 and 2 are the loops to the steering wheel air bag. The SDM(sensing and diagnostic module for the air bag) is seeing these circuits as open. There is a bullitin for problems with a loose connection for the yellow connector behind the left kick panel(right behind the e brake and hood release). I would remove the kick panel, and disconnect and reconnect the connector a couple times. See if the light goes out. Or wiggle and move the connector with the key on, as the light should go out if it makes good connection. If it does go out you need to replace this connector. Good luck.

#05-09-41-001B: Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (Inspect/Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222) - (Jun 2, 2008)

Subject:Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (DTC) B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 (Inspect and/or Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222)
Models:2003-2006 Cadillac Escalade Models
2003-2006 Chevrolet Avalanche, Suburban, Tahoe
2003-2007 Chevrolet Silverado (Classic Only)
2003-2006 GMC Yukon, Yukon XL, Yukon Denali, Yukon Denali XL
2003-2007 GMC Sierra (Classic Only)


This bulletin is being revised to add the 2007 model year for pickups and change a part number. Please discard Corporate Bulletin Number 05-09-41-001A (Section 09 -- Restraints).

<A href="#ss1-2146754">
Condition
Some customers may comment that the Service Supplemental Inflatable Restraint Light is on.

Diagnosis with a scan tool may indicate a DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

<A href="#ss2-2146754">
Cause
The most likely cause of any one of the following DTCs: B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 is improper connection/high resistance in the IP harness to inflatable restraint module connector C221 and/or C222.

<A href="#ss3-2146754">
Diagnostic Information

DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 will set when one of the following conditions occur:
• The SDM detects the air bag module deployment loop resistance is greater than 4.8 ohms for 500 milliseconds.
• The SDM detects that the voltage at the air bag module high control is less than 2.4 volts and deployment loop resistance is 6 ohms or greater for 500 milliseconds.
• For additional diagnostic information, refer to DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 in the appropriate SI Document.
<A href="#ss4-2146754">
Correction
DO THIS

Don't Do This

Test for proper connection/high resistance at connector C221 and/or C222.

DO NOT replace SIR system components prior to testing for proper connection/high resistance in C221 and/or for DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling Zones. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.



Important:
The IP harness to inflatable restraint module connectors C221 or C222 is NOT located at the base of the steering column.
• C221 (4 Cavities) -- I/P Harness to Body Harness, behind the left kick panel
• C222 (4 Cavities) (w/o HP2) -- I/P harness to body harness, behind the right kick panel
• C222 (4 Cavities) (w/HP2) -- Behind the left side I/P access panel
• Refer to the Master Electrical Component List for additional location information.


  • <LI type=1>Remove the appropriate side door sill plate. <LI type=1>Remove the appropriate side hinge pillar panel. <LI type=1>Locate the IP harness to inflatable restraint module yellow 4-way connector C221 or C222. <LI type=1>Inspect the IP harness to inflatable restraint module connector C221 or C222 for proper connection. <LI type=1>Disconnect and reconnect the IP harness to inflatable restraint module connector C221 or C222 THREE times. <LI type=1>Clear the DTC and road test the vehicle. • If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES NOT reset, no additional repairs are necessary. Continue with step 10.
    • If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES reset, the most likely cause is high resistance in the IP harness to inflatable restraint module connector C221 or C222. Continue with the next step.
    <LI type=1>Replace the appropriate connector C221 and/or C222, P/N's 15306186 and 88987998. Refer to SIR/SRS Wiring Repairs (SI Document ID #325229). <LI type=1>Road test the vehicle and confirm that the repair is complete. <LI type=1>Install the driver's side hinge pillar panel.
  • Install the driver's side door sill plate.
<A href="#ss5-2146754">
Parts Information
Part Number

Description

Qty

15306186

Connector (4-way Female, w/Leads)

1

88987998

Connector (4-way Male, w/Leads)

1 Service Airbag Have Codes Ask the GM Technician

May 01, 2012 | Chevrolet Impala Cars & Trucks

1 Answer

CODE B0026 HOW DO I RESOLVE? REAR DOOR LOCKS NOT WORKING, SERVICE BRAKE BOOSTER WARNING ON, AIRBAG LIGHT ON, SERVICE AIRBAG WIRNING, INTERMIT NO START. HELP MEEEE!!!!!!


The airbag connectors in behind the front kick panels have high resistance. The fix is to replace them. Here is TSB's

#05-09-41-001B: Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (Inspect/Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222) - (Jun 2, 2008)

Subject:
Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (DTC) B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 (Inspect and/or Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222)

Models:
2003-2006 Cadillac Escalade Models
2003-2006 Chevrolet Avalanche, Suburban, Tahoe
2003-2007 Chevrolet Silverado (Classic Only)
2003-2006 GMC Yukon, Yukon XL, Yukon Denali, Yukon Denali XL
2003-2007 GMC Sierra (Classic Only)

This bulletin is being revised to add the 2007 model year for pickups and change a part number. Please discard Corporate Bulletin Number 05-09-41-001A (Section 09 -- Restraints).

Condition
Some customers may comment that the Service Supplemental Inflatable Restraint Light is on.

Diagnosis with a scan tool may indicate a DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

Cause
The most likely cause of any one of the following DTCs: B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 is improper connection/high resistance in the IP harness to inflatable restraint module connector C221 and/or C222.

Diagnostic Information
DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 will set when one of the following conditions occur:
• The SDM detects the air bag module deployment loop resistance is greater than 4.8 ohms for 500 milliseconds.
• The SDM detects that the voltage at the air bag module high control is less than 2.4 volts and deployment loop resistance is 6 ohms or greater for 500 milliseconds.
• For additional diagnostic information, refer to DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 in the appropriate SI Document.

Correction

DO THIS
Test for proper connection/high resistance at connector C221 and/or C222.

Don't Do This
DO NOT replace SIR system components prior to testing for proper connection/high resistance in C221 and/or for DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling Zones. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.

Important: The IP harness to inflatable restraint module connectors C221 or C222 is NOT located at the base of the steering column...
• C221 (4 Cavities) -- I/P Harness to Body Harness, behind the left kick panel
• C222 (4 Cavities) (w/o HP2) -- I/P harness to body harness, behind the right kick panel
• C222 (4 Cavities) (w/HP2) -- Behind the left side I/P access panel
• Refer to the Master Electrical Component List for additional location information.

1. Remove the appropriate side door sill plate.
2. Remove the appropriate side hinge pillar panel.
3. Locate the IP harness to inflatable restraint module yellow 4-way connector C221 or C222.
4. Inspect the IP harness to inflatable restraint module connector C221 or C222 for proper connection.
5. Disconnect and reconnect the IP harness to inflatable restraint module connector C221 or C222 THREE times.
6. Clear the DTC and road test the vehicle.
• If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES NOT reset, no additional repairs are necessary. Continue with step 10.
• If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES reset, the most likely cause is high resistance in the IP harness to inflatable restraint module connector C221 or C222. Continue with the next step.
7. Replace the appropriate connector C221 and/or C222, P/N's 15306186 and 88987998. Refer to SIR/SRS Wiring Repairs (SI Document ID #325229).
8. Road test the vehicle and confirm that the repair is complete.
9. Install the driver's side hinge pillar panel.
10. Install the driver's side door sill plate.

Parts Information
Part Number: 15306186
Description: Connector (4-way Female, w/Leads) - Qty 1

Part Number: 88987998
Description: Connector (4-way Male, w/Leads) - Qty 1


Hope this help (remember comment and rated this help).

May 07, 2010 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...