Question about Cars & Trucks
Brake light switch
Easy just go under the steering wheel and look at the brake pedal right behing on the uper level is the switch you can removed
Posted on Nov 01, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I found on my 92 lumina 3.1 the easiest way to change the belt is to have two people handy (you and a helper) push the belt tensioner (which is more in the middle of the belt system, its the only thing that has give when pressure is applied) down (which will loosen the belt) have your partner slip the belt off the altenator (which should be on the very top of the belt system on the passenger side) and just pay attention to the way the belt is routed as you remove it, put the new one on (routed correctly) push the tensioner again have your partner slip it back over the altenator....and you have a new belt on with no tools :)
just pay good attention to the routing of the belt, and i also think there is a black cover over the belt which needs to be removed before the old belt can be taken off (if you dont see it at first you will find it) it has 3 bolts i think and also a diagram of the routing....
TIP: the tensioner will take some muscle to move down, and yes the belt is running over it....
Posted on Dec 08, 2008
why not just replace the turn signal switch must faster and safer . buy one from your local parts house then you can see its not that easy to install but you can do it with a little help
Posted on Aug 26, 2009
If your fuses and bulbs are all good, then look above your brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you brake it pushes the switch in. Or it will be between the dash and the brake arm so when you brake it pulls the switch out. Most likely this switch needs to be replaced
Posted on Nov 05, 2009
Tips for a great answer:
Apr 18, 2012 | 1992 Chevrolet Lumina
Mar 08, 2011 | 1992 Chevrolet Lumina APV
Jan 03, 2011 | 1999 Chevrolet Lumina
Feb 04, 2010 | 1999 Chevrolet Lumina
Nov 18, 2009 | 1995 Chevrolet Lumina
Sep 25, 2009 | 1992 Chevrolet Lumina
Aug 11, 2009 | 1992 Chevrolet Lumina
Apr 08, 2009 | 1992 Chevrolet Lumina
39 people viewed this question
Usually answered in minutes!