Question about Cars & Trucks

Open Question

How to bypass ford au 2 smart shield wont crank and wont allow fuel pump to turn on

Posted by on

  • ross Aug 13, 2013

    can l bypass smartsheild wont crank windows dont work if l can ..can someone tell me what to do please

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: hello i have a 92

try to reset the fuel pump shut off switch if that doesent work check the fuse for the fuel pump

Posted on Nov 25, 2008

  • 2 Answers

SOURCE: 1989 Ford Bronco 5.0 engine

Timing is everything. Try testing you PCM. It's the little gray box near the base of your distributor. If you have spark, and fuel at the rail (plus good fuel rail pressure) than the timing is your problem.

Check the pet-**** on the fuel rail assembly to make sure the fuel at the rail is under presure and getting to your injectors. Then again make sure you have spark, lastly you should be able to test the trouble codes to see if your PCM is the issue.
Goos luck.

Posted on Apr 15, 2009

joe7379
  • 93 Answers

SOURCE: 2001 ford taurus wont start

It could be bad plugs, plug wires, a bad ground will do this as well. Check to see if it has the three main things.

Spark
Air
Fuel

Anther common problem is the crank shaft speed sensor. It will cause it to not spark and not start.

Joe

Posted on May 19, 2009

  • 242 Answers

SOURCE: Power to fuel pump on 91 ford mustang cobra 5.0

The ignition module sends a "pip" signal to turn on the fuel pump and keep it running. If the signal is lost, or not present you get no pump. This is a safety in case of accident or other hazard in order to shut off the fuel so it wont keep pumping into a car with the key still on but engine disabled for some reason. Take the module to your local parts store and have it tested, for free to check.

Posted on Sep 30, 2009

  • 2 Answers

SOURCE: could you tell me where the fuel pump is located

in the tank. easiest way to access is remove the tray

Posted on Nov 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i bypass the smartsheild on a 2001 au ford falcon ute.i cant start because the smartsheild comes on an jams the motor?


the problem was raised in the australian AU ford forum not so long ago
you cant bypass it
ripping out wires without knowing ... just causes more grief

have to use a scanner to re set system
or find which module of the smart shield has failed
AuII Smartsheild question
fordforums com au
i have the downloadable repair manual for that AU

one download only.. not for resale etc etc
Ford Falcon AU 1998 2002 Workshop Manuals Factory Service Manuals

Oct 17, 2016 | Ford Cars & Trucks

1 Answer

Ford territory diesel cranks over wont start


cranking speed has to be fast so make sure battery is well charged and in good condition
check that the stop solenoid is operational allowing the pump to pressurize the injectors
run the fault codes to check cam and crank position sensors
check for air in the fuel lines and pump--bleed system
check fuel level

Sep 10, 2016 | Ford Territory Cars & Trucks

4 Answers

I have a 1999 Pontiac Grand Am why won't my car start? it just spins but wont crank. I changed the core packs and it's still not cranking


The term " CRANK" is what the Starter is doing to the Engine. I think you mean is 'it Cranks but wont Start'.
Is the engine getting Spark? Is the engine getting fuel? You need to check these two things before randomly swapping out parts.
If it's fuel starvation.. Check the fuel pump relay or possibly a bad Fuel Pump.

Jun 06, 2015 | 1999 Pontiac Grand Am GT

1 Answer

My ford au xr6 wont run has bad miss fire


Have you run a compression test? Could have burnt valve or timing belt may have jumped a tooth or two.

Dec 12, 2014 | Ford Cars & Trucks

1 Answer

2001 ford taurus changed fuel pump ignition coil and crank shaft sensor still wont start


DOES YOUR ALARM IS OFF OR YOUR SMART KEY ( IGNITION KEY WITH CHIP IS WORKING?

Sep 02, 2012 | Ford Taurus Cars & Trucks

1 Answer

How to bypass immobiliser in 94 ford falcon after ignition barrel has been replaced ??


Your ford dealer visit may not be as expensive as you think, you need 2 pats keys and have them perform an ignition key code erase then they should be able to program your 2 new keys, The Ford Dealer I work at only charges 0.5hrs or approx $50.00 dollars Canadian.

Jan 12, 2012 | Cars & Trucks

2 Answers

Ford transit 350 2.4 on 2001 cut out while driving and wont start i can get fuel up 2 injector pipes by handpump but when we turn it over it will not fire and there is no smoke comin out of exaust


Your hand pump doesn't supply enough continuous pressre to feed fuel throgh the injectors. You probably need to replace the fuel pump or maybe something as simple asthe pressure regulator

Apr 03, 2011 | Ford F-350 Cars & Trucks

1 Answer

2008 ford super duty 6.4 diesel wont crack turns over and has diesel and oil makes no sense just drove it home and parked it then 24 hours later it wont crank up


check fuel pressure, check filters , bad fuel or water in fuel is a common problem with diesel fuel.start simple, turn key to on ,,can u hear fuel pump. remove filter check condition see if water in filter.they have 2 or more filters. prime pump per manual try again.

Mar 21, 2011 | Ford F-350 Cars & Trucks

1 Answer

Replaced starter and wont start. Im wondering if it is the shut off switch in the trunk? does the switch have to be up or down?


the starter cranks the engine, the switch in the trunk has a button that you depress to reset the fuel pump. if the fuel pump doesnt operate then the switch may tripped, the button is DOWN. So does the engine crank? does it not crank? cranks but wont run? if it cranks but wont run, then check the switch in the trunk. Power goes to that switch and then to the pump, so if that switch has power going through it, and the pump doesnt work, the pump is bad. when turning the key on you should hear the pump go on for 2 seconds.

Dec 05, 2010 | 1999 Ford Taurus

1 Answer

Car ran fine one day, not it will crank but not


Your fuel system requires 35-45 PSI. If you don't have this pressure in the line then your fuel filter or fuel pump is at fault.

Jun 11, 2009 | 1987 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...