Hi i have an 4dr mitsu mirage 2001 and i have taken all the screws but it dosent realease it has flexibility and it moves a bit but it appears to be stuck. the scres that i took out are in the front so i dont seem to find any others.
Which part of the dash board are you trying to remove? Are you trying to get to the CD Player? If that's the area you are talking about its simple, 1) remove the ash tray first: Pull tray outwards and then press the lever that you seen inside the tray..the big silver thing. 2) Remove lighter switch. 3) Use a screwdriver to pry the SIDE-TOP part of the panel out.That's it. It will pop out.
I've done this on my car.
If its another part of the dash board, sorry for this reply.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would replace the steering pump belt at the same time you do the alternator belt (buy both). To take off the alternator belt . First
, take off the negative battery cable so you do not blow an expensive
fuse on the positive battery cable clamp(or a block fuse under the hood). Facing the back of the
car , reach UNDER the alternator and loosen the bolt on the bottom
side, now loosen the bolt on the adjuster block on top, you can now turn
the adjuster bolt and move the alternator to change the belt. To take off the steering pump belt on the front of the motor,
you need to loosen the nut on the back side of the pulley it holds the
adjuster pulley in place . With the adjuster pulley loose , you can use the adjuster bolt to move
the pulley to adjust/take off the steering pump belt.
have no idea offhand without a look myself ,best advice is to ask around for a recomended local mechanic and ask him to have a look ,your problems could be as simple as a air filter blocked but it could be anything
Don't know how much this will help, but some factory radios have a tool that is shaped like a big staple and there is 2 of them. If you see 2 small round holes on the sides of your factory cd player, then thats where these tools go. I have seen them at Wal-Mart and at Autozone. I have mainly seen these on Ford cars, so I'm not sure about a Mirage. Hope it helps.
As far as i know, original stock carburetor for Lancer 1989-1992 engine 4G15 12 valve is Aisan Variable Venturi. It have 3 screws : - air-fuel mixture screw - main jet adjusting screw - idle adjusting screw
and here's the document you may need : http://www.mitsubishi-motors.kiev.ua/info.php?id=20 http://www.lilevo.com/mirage/