Question about 2008 Hummer H3

Open Question

Hummer emergency brake alarm going off when brake is off

I pulled off the emergency brake knob a little too vigorously and now I can release the brake but the alarm is still sounding and the light is on.

Posted by on

  • Evelyn Nov 01, 2012

    My guess is one of two things. The simple thing is that the E brake is fully released from the drum (or rotor depending on the make and model) and the sensor is still triggered on giving you the warning signs. You would probably have to get the sensor replaced with that issue.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 78 Answers

SOURCE: BRAKE SYSTEM FAILURE

well what could of happend they probably put the battery on backwards and blew out a fusible link.The links run thru the wires by the battery and behind the alternator check it out Good Luck keep me posted

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

Hummer H3 airbag light wont go off


Airbag light on in a Hummer H3 Dashboard???Here is the fix...
Start the engine of your car, set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brakepedal to its fully-applied position with your left foot. Now while you are still holding the regular brake pedal down. Quickly release the parking brake, Pull the bottom edge of the lever, located above the parking brake pedal, with the parking brake
symbol, directly rearward to release the parking brake. Make sure pedal snaps hard all the way back releasing the parking brake... If this doesn't work the first try, try it 3-5 times and it shall work... The airbag light will go off...


NOTE: The parking brake pedal is located to the left of the regular brake pedal, near the driver's door.
&

The parking brake lever is located above the parking brake pedal, with the parking brake symbol.

May 28, 2012 | 2006 Hummer H3

1 Answer

Emergancy brake alarm


The cable needs to be adjusted so when the brake is released the pedal will come up completely.

Nov 10, 2011 | 1994 Pontiac Bonneville

2 Answers

Emergency brake light stays on the dash. is it a troubleshooting light?


It probably indicates that the cable is not being fully retracted when brake is disengaged. Spray as much of cable as possible with WD-40, allow to sit for a few hours, the engage and disengage the brake several times untill it loosens. If this fails the cable may be stretched and needs to be replaced.

Jun 25, 2010 | 1996 GMC Yukon

2 Answers

The emergency brake will not release when I pull the release handle.


just a little rusty is it ???\
\
theres a product called release all spray it down the parking break cable ends in the parking break housing
also if need to work asap put truck in reverse and slowely work it back and forth rock the truck

or if all else fails remove tires and wach drums with a hammer untill they release then once open pull the cables with vice grips and have friend pull hand break
so you get a back and forth motion untill cable free remem ber there are 2 rear drums on every truck
so do both cables

Jan 10, 2010 | 1988 Chevrolet S-10

3 Answers

Emergency break cable broke on 2004 silverado


I had the same problem on my 2003. Open the driver door all the way. Get on your knees just outside the door. Follow the plastic tub that holds the parking brake release cable inside the truck. Start from the release lever and follow to the end of the tube. There will be a metal lever that the cable was attached to before it broke. You have to pull that lever with your hand to release the parking brake. Very Important!!!...Hold the parking brake activation pedal with your other hand when you release the brake. Let the pedal out slowly when you pull the metal release lever. The pedal will come back very fast and you could injure yourself if you are not careful. Good luck!

Jul 27, 2009 | 2000 Chevrolet 3500

1 Answer

Emergency Brake Cable Is Broken


Somewhat easy to replace. The part is a dealer item (purchase only from Chevrolet dealer) If you are going to do this yourself, take many photos on the progression of the job to refer back to when putting it back together. Good Luck!

Apr 21, 2009 | 1996 GMC Suburban

1 Answer

Rear brake calipers on 94 Acura vigor are frozen and can't replar


Have you checked to see if the emergency brakes are on? Reason I ask is it's unusual that both calipers would be seized at the same time. Once the e-brake has been released visually inspect to see that the cables are also free (loose) where they attatch to the caliper. There is a technical service bulletin which states that one side can become sticky but not both seized.

Apr 04, 2009 | 1994 Acura Vigor

1 Answer

1988 cadillac deville: can't get emergency brake to release


right above the foot emergency brake to the right is a little handle release pull that towards you and it will release

Jan 28, 2009 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
2008 Hummer H3 Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...