Question about Cars & Trucks

1 Answer

220 volt surmauragble well pump

How to wire it up

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,117 Answers

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to Factory Installed Systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Posted on Nov 01, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 gmc sierra 5.0 it wont start it has less than 12 volts of power on pump wire


What do you have coming out of the fuel pump relay ? The connector at the tank includes the ground wire for the gauge which is about 7 volts. Make sure you are checking the right wire.

Aug 24, 2014 | Cars & Trucks

2 Answers

Low voltage at front windshield washer pump


High resistance, partially broken wire, corrosion or poor connection, something in that circuit...somewhere. Take a voltage reading at the pump's fuse for a starting place- if you have a good 12 volts there, the loss is from that point in the wire to the pump connector. The switch, the junction block. Look at the pump connector- is the wire connection good- and back from it at the wire where it may have got pulled or yanked hard, breaking some wire strands, or got exposed to heat and burned a bit, look for things like that. I hope you don't have to pull some wiring harness apart. That's tedious, easier to rewire it after a point. Good luck.

Dec 07, 2012 | 1993 Chevrolet Suburban

1 Answer

Having problem with 1998 Mercury Grand Marquis LS Fuel Pump. Only getting 6.58 volts at the pump. Suggestions?


Sounds like a bad connection between the two points.
It may be easier to run a new wire than to tear the harness and connectors apart.

Sep 28, 2012 | 1997 Mercury Grand Marquis

1 Answer

Fuel pump not coming on,installed new one, white plug that has a yellow wire has 5 volts and ground is ok the 2 wires in the center shows 0


The plug you are referring to is probably the fuel tank pressure sender not the fuel pump. It would be plugged into a black sensor about 2 inches long pushed into a rubber grommet on the fuel bung. The fuel pump connector would have more that 2 wires going to it. most likely a heavy purple wire would be the power to the pump. It has to have 12 volts to it to work. The sender may have 3 wires, 5 volts, ground, and sense. the pump connector would have 12 volts, ground and 5 volts for the fuel gauge sender down in the tank.
If the 12 volts is not there, check the fuel pump relay. it is usually up on the drivers side firewall.
With the key in the on position without starting the engine, you should have 12 volts to the pump for 3 seconds then it will click off. Without cranking the engine you should be able to locate the relay by the clicking sound.
There is also the obvious, like checking the fuel pump fuse.

Jan 11, 2011 | 2003 Chevrolet Avalanche

2 Answers

We replaced the fuel pump on our 2001 chey 1500 4.8 and the fuel pump still will not come on and there is power getting to the fuel pump but the fuel pump wont come on


POWER GOING TO FUEL PUMP NOT TO FUEL PUMP.YOU CAN BUY AND REPLACE FUEL PUMP WIRES SEPERATELY.SOUND LIKE OLD WIRES HAS A OPEN CIRCUIT OR POOR GROUND.

Oct 01, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

FUEL PUMP STOP WORKING HOW VOLTS R SUPOSE TO BE


12 volts, and thgis should be fed by a fuel pump relay.

Jul 29, 2010 | 2000 Chevrolet S-10

3 Answers

It seems i am not getting any power to fuel pump, replaced pump still no power dont hear pump turn on at key on position check relays but not sure on good or not


Replace the oil pressure switch for the third wire on that sends 12 volts to the fuel pump upon turning the ignition key on to prime. Once oil pressure is achived the computer shuts that circuit off and turns on the fuel pump relay to power the pump till you shut off the engine

Jul 13, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

Fuel pressure intermittently drops causing sputter and die.


check for 12v constant at your fuel pump if you are not getting that replace your relay.
if you are getting 12 volts at your fuel pump the fuel pump is possible to run tuel it gets warm then shut down to a lower rpm I would then replace the fuel pump

Oct 10, 2009 | 1994 Dodge Ram

1 Answer

On my 1994 plymouth voyager the 3 wire harness to fuel pump (blue wire) doesn't have 12 volts; should it? fuel pump quit then worked once when hot-wired with 12 volts. fuse and relay is good.


The wire should not be hot until the relay is triggered. The relay does not get triggered until the ignition key is turned on. It will run for 3-5 seconds or until the system pressure it at max.

Apr 26, 2009 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...