Question about 2000 Dodge Intrepid

1 Answer

2000 dodge 3.5 obd connector schematic

Need diagram of pin locaation on obd connector

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,164 Answers

Here it is. All OBD2 connector's are the same.
Federal mandate

2000 dodge 3.5 obd connector schematic - 11_1_2012_7_12_18_pm.jpg

Posted on Nov 01, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: Need diagram/schematic for serpentine belt replacement

Should be a tag on the core support somewhere that shows a diagram how to install your belt,usually its right on top where the radiator bolts to core support,open hood look down on top of support or its on the inside of hood open hood and look up see if theres a tag with a diagram of belt installation

Posted on Apr 08, 2009

  • 55 Answers

SOURCE: schematic belt diagram 2004 dodge sprinter 2500

search on internet, mercedes om 612 engine diagram

Posted on Nov 04, 2009

abauto
  • 353 Answers

SOURCE: 2000 dodge stratus rear end suspension diagram

Diagram

02c5fb4.jpg0007120.jpg

Posted on Sep 15, 2009

  • 1757 Answers

SOURCE: Need diagram/schematic for serpentine belt replacement

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...

http://www.2carpros.com/car_repair_information/year/1998/make/dodge/model/ram_van/1998_dodge_ram_van_drive_belt_routing_diagram.htm

Posted on Mar 08, 2010

  • 1 Answer

SOURCE: 06 dodge charger o2 sensor wiring diagram

on my 2006 dodge 2500 hemi my o2 sensor wires got pulled out of conector need help on were the go back in.

Posted on Jan 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture of obd schematic for 2005 jeep grand cherokee


OBD2 schematic of what ? The OBD2 connector under the dash , the sensors , the engine control module pin out chart ? You can go to www.bbbind.com an get free wiring diagrams ! click on technical information then on TSB'S an wiring diagrams . then click on I agree on the next page . next page click on wiring diagram an enter you vehicle information an your on your way !

May 19, 2015 | Jeep Cars & Trucks

1 Answer

2002 dodge neon, no power to the obd?


If your saying pin 16 at the data link connector has no voltage, check the fuse in the diagram. Not only check the fuse, check the fuse circuit for voltage
25607577-crhbrgumbttf5sjb1bqav1ea-5-0.jpg

Mar 26, 2015 | 2002 Dodge Neon

1 Answer

Why wont obd communicate with diagnostic reader on 2000 dodge ram 1500 5.9


You have a bus communication problem. Start by checking all fuses. Next check all connectors. Specifically the pcm connectors and ground. These are located in the engine compartment on the passenger side behind air intake. I have ha 2-3 of these trucks need either a pcm or connector for open asd relay circuit issues.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

Where is the diagnostic port located on a 2000 fiat marea


on a 99 2.0 model you will have 2 diagnostic ports. both of them will be the fiat 3 pin type.

to connect the 3 pin fiat connector to a 16 pin obd2 connector you need 4 lengths of wire. use 3 lengths of wire to connect the 3 pin connector to the obd connector. also use 1 length of wire for power to the obd connector.

on the 16 pin obd2 connector use the following pins
4- chassis ground (connect to ground on 3 pin connector, or any good chassis earth)
5- signal ground (connect to black wire pin on 3 pin connector)
7- k line (connect to white wire pin on 3 pin connector)
16- 12vDC (connect to battery positive terminal)

Apr 08, 2013 | Cars & Trucks

1 Answer

My Obd connector does not work with a code scanner. I have a 2000 pontiac Montana


You must verify that you have 12 volts + present at pin #16 of the connector, see diagram below, if no voltage check owners manual for fuse location.
9_27_2012_8_30_31_pm.jpg

Sep 27, 2012 | 2004 Chevrolet Tahoe

1 Answer

2000 dodge durango OBD plug wiring diagrams. What ports numbers and what color goes in the port?


Here ya go.dn080203.gif DATA LINK CONNECTOR - BLACK 16 WAY CAV CIRCUIT FUNCTION 1 - - 2 - - 3 D1 20VT/BR CCD BUS(+) 4 Z33 16BK/RD GROUND 5 Z12 18BK/RD GROUND 6 D20 20VT/WT SCI RECEIVE 7 D21 20PK/DB SCI TRANSMIT 8 - - 9 - - 10 - - 11 D2 20WTR/BK CCD BUS (-) 12 - - 13 - - 14 D22 20LG SCI RECEIVE 15 - - 16 M1 20PK FUSED B(+)

May 19, 2011 | Dodge Durango Cars & Trucks

1 Answer

Need a vacuum schematics diagram for a 2000 dodge ram 1500 with a 5.2 liter


why does it need to be dam hard to get a vacuum diagram for 2000 dodge 1500 truck

Mar 03, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

Obd 2 connector wiring 1999dodge dakota


You can get a repair connector at a dodge dealer. Maybe a junkyard will sell you one

Jun 25, 2010 | 1999 Dodge Dakota

1 Answer

2000 explorer 4x4 4.0L SOHC - I have no power to


check fuse number 5 in the passenger compartment fuse box, it is a 10 amp, that is the OBD connector power supply, if that fuse is good just run power to pin number 16 of the connector, this the bottom row of pins last one on the right.

Mar 02, 2010 | 2000 Ford Explorer

1 Answer

DLC communications with OBD not possible


OBD II connector troubleshooting 101

I had the same problem with my 2000 Elantra. the OBD II connector pins get squished and won't make cantact with the scan tool, therefore no connection. the solution is to bend the pins back so they will connect to the scan tool.


FIRST! check your lighter and radio fuses (which you have already done). If possible, make sure your scan tool is working properly, try it on another car. If it is functioning properly, remove the 2 screws holding the obd II connector to the dash. Look for obvious signs of corrosion, damage, or stuff that shouln't be in the connector (rocks, gum, etc.) clean the connector with a good electronics cleaner (I use the CRC stuff), you can usually find it at you local parts store, radio shack, or even wal mart. hose down the inside of the connector thouroughly and allow time to dry.

check for voltage between 4 (gnd) & 16 (+vcc) then 5(gnd) and 16(+vcc) with the ignition on the voltage should be between 12v-16v (these pins may be different on other cars, look for an OBD II connector pinout diagram if your car is different). If this voltage is not present at either pin, the problem is not the connector. check your fuses and wiring. if this voltage is present at both pins continue.

Here's what I did. with the connector free from the dash, you can see the back of the connector where the wires enter the connector. on either side of the connector there may be a white clip. pop both of them off. you should be able to push a small screwdriver or pick in that space to pull the pins back out towards the outside of the connector. do one at a time so you can tell if the pin has moved back out into position. do this for all of the pins. Try to connect. if still no luck try again to push out the pins and reconnect.

If your connection is restored, replace the clips, screw it back into the dash. Return your car to the lousy DMV where they will proceed to tell you something else is wrong which they neglected to tell you on your first 10 visits!! :-)

Stuff thats good to know:
some auto parts stores will connect their OBD II scan tool to you car for free. auto zone is one place
some times the computer will need to reset to restore a connection to the scan tool. to do this simply cycle the ignition off (wait a few seconds) then on again.
online auction places are a excellent resource for USB to OBD II connectors to connect your laptop to your car. there is lots of OBD II diagnostic freeware out there to go with your newly purchased connector.

Good Luck

Chris
-CL Systems

Jan 28, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2000 Dodge Intrepid Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...