Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first locate the washer tank, remove the bolts that are holding it. remove the wire to the motor, remove the hose that is attached to the motor, slowly pull the motor off the rubber gasket .
do the reverse in installing a new one.
tnx 4 using fixya,
Posted on Sep 01, 2008
You must remove from it's mount and empty out any fluids that is in tank.fill the tank with water and locate where the leak is coming from. wash tank a few times and the let dry upside down. Get some sand paper (80 grit course) and sand area where leak is, clean area with a vacume or clean rag.you can buy a 2 stage epoxy that comes in an injection form and squeeze it out on a pc of paper and then get a q-tip and mix the 2 components together, fill the crack or hole generously with the q-tip, if you have to,let dry for 24 hours and mix more and put more on. let dry another 24 hours, replace tank back in it's place and you've solved your leak. (epoxy does wonders if its used properly.
Posted on Nov 23, 2008
the washer pipe will have blown appart.this happens if you opperate the rear washer when it is frozen.it will either be off in the tailgate usually when this happens there is water around the catch when you open the tailgate.or in the headlining in the left rear,have a feel and see if the headlining is wet.to avoid this reoccuring use a good screenwash with frost protection.
Posted on Feb 08, 2009
Remove the small tube that's attached to the fluid tank and press the wash button.
1 - If fluid isn't gushing out take out the connector to the pump and connect a light bulb to it. If the bulb lights up when you press the button the pump either is busted (replace it) or its connectors are corroded (clean them).
2 - if the fluid is gushing out then it's a blockage somewhere down the line; put the tube back in the tank, find and disconnect the other end, press the button. If it doesn't work then you have found the culprit - replace it. If it does flow then continue till you locate the blocked part.
Posted on Nov 23, 2009
Yes it's easy to do, remove tank pull pump off of tank, and replace pump, Napa has this pump # 6651533 it runs between $14.00 and $20.00 .
Posted on Jan 04, 2010
Tips for a great answer:
Mar 23, 2015 | Cars & Trucks
Jan 14, 2013 | 1997 GMC Jimmy
Oct 21, 2011 | 2000 Buick LeSabre
Jan 01, 2011 | 1999 Mercedes-Benz E-Class
Jan 30, 2010 | 2000 Buick LeSabre
Nov 09, 2009 | 1999 Pontiac Sunfire
Mar 22, 2009 | 2004 Hyundai Santa Fe
Dec 29, 2008 | 2000 GMC Yukon XL
221 people viewed this question
Usually answered in minutes!