Question about Cars & Trucks

Open Question

High idle will not come down to normal on a 2005 chevy optra

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 54 Answers

SOURCE: 95 chevy g20 idles too high, how do I turn idle down?

i would first check for a vacuum leak because this is considered a newer vehicle and does not have an idle screw, so I would get some "brake kleen" and mist it at each vacuum hose, if the idle changes then change that hose it means there is a leak, and that should sove your problem, if it doesnt , I would then check /replace the idle air control valve as this is the motor that controls the idle

Posted on May 26, 2009

badealer888
  • 414 Answers

SOURCE: 2005 jetta tdi high idle

If a/c, headlights,.. other stuff is on 950 is about right.

Posted on Jun 19, 2009

ftw1952
  • 10319 Answers

SOURCE: low oil pressure 80,000 km.chevy optra 2005

Pull the oil pan and check the oil screen first. It may be plugged up
This happens when the engine is not serviced and neglected

Posted on May 31, 2010

caroldon
  • 17129 Answers

SOURCE: a4 2.0fsi idling highg

Possible problem could be failure of the vacuum link that should maintain the RPM when the a/c is turned on. Open the bonnet to check for any loose tubing/ wires.

Posted on Jun 24, 2010

  • 36 Answers

SOURCE: where is the thermostat located in the 2005 chevy

It is located on the left side of the engine(frt view) remove the rad hose then the 2 bolts holding the housing to the engine and you will find the thermostat.

Posted on Nov 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Optra is leaking fluid from somewhere and is overheating, how can it be fixed


Have you checked all the hoses? Next time it heats up, open the hood, or look underneath and see where its coming from!

May 17, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

Have chevy optra 2005 manual trans. Gear shifter became loose


remove the boot around the shifter and tighten the linkage bolts.

Oct 15, 2013 | 2009 Chevrolet Optra 1.6

1 Answer

Chevy Optra 2007, engine light flashing


flashing is a severe condition, most cases it is from random multiple misfires, i would get it checked soon.

Sep 23, 2012 | 2007 Chevrolet Optra 1.6

1 Answer

I need a 2005 chevy optra timing belt diagram


2005 Chevrolet Optra has four available engines: 1.4L (DOHC), 1.6L (L91), 1.8L (L79) and 2.0L (L34 GMDAT).

If you would like a belt routing diagram, it would be helpful if you would mention which of these engines your Optra is equipped with.

Jul 08, 2011 | Chevrolet Chevy Cars & Trucks

3 Answers

04 chev optraheadlights not working. new switch and drl module. drls working .no high or low beam.relays and fuses good


apparently there has been a Daewoo technical bulletin that says problems with low beam and DRL on some 2005-6 Optras caused by a melted wire in the s201 splice pack on the IP harness. If I knew where that was I might be able to fix the same problem on my Optra. Tried new light switch but no success.

Jan 16, 2010 | Daewoo Nubira Cars & Trucks

2 Answers

Idler is too high on start-up, goes up to 2.5-3 rpm. and comes back to normal. just started a week ago. what could be the problem? 2005 Chevy Aveo


I bought my 2004 aveo 49 miles. I've had several issues with the car. But recently I been experiencung high idle at start up and clutching. I change IAC. Plugs and wireds. Nothing worked. Today the high idle became constant. It was a metal bubble flex tube near the IAC unit that goes to the exhaust stuff down behind the motor. It apparently was cracked cause today it broke causing the constant high idle sound like a vacumn. We blocked it off with a stick to get the idle back down to 900 rpm instead of 3-4000 rpm took we can get to auto zone for high temp hose per Chevy dealer. I hope this helps someone cause it was fustrating and costly.

Mar 08, 2009 | 2005 Chevrolet Aveo

1 Answer

2004 chevy optra belt


Here is AutoZone's manual page showing the routing.

Jan 12, 2009 | 2005 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...