Question about Vauxhall Cars & Trucks

Open Question

Vauxhall insignia fault code 3

Random code appeared on dashboard and constantly reappears.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: Renault Espace ABS light on constantly, break fault/stop light

hi abs light indicating you have sensor down on brakes or master cilinder is on its way out,try checking sensor will need to go to a back street garage cheaper

Posted on Mar 19, 2010

  • 4793 Answers

SOURCE: I wish to remove the

call the "plastic surgeon"(yellow pages) they fix dashes in situ.....
and cheap too,better than diy...

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard light goes in and out on ford ka whilst driving at night


You mean on and off? Is it random or a constant flash, like a watch or clock? I would try to "clean" the dash light level switch by moving many times from bright level to low level. It may clean the contacts thereby. Otherwise, check connections to that adjustment switch. Or, replace the switch.

Apr 01, 2015 | Ford Ka Cars & Trucks

1 Answer

My 99 vw beetle keeps making beeping sounds at random and constantly for no apperent reason and the abs light also appears or stays on for extended amounts of time (not related to the random beeping) any...


check make sure alternator charging battery if alternator fails volts out put 11.0 volts that will set off abs light, if alternator okay have vechicle abs brake system scanned at the volkswagon dealership.if abs light flashing while in motion could have faulty wheel speed sensor.

Sep 18, 2012 | Cars & Trucks

1 Answer

Have 2000 Toyota Camry XLE. Check Engine light appears. Code shows P1035 for Oxygen Sensor Bank 1 Sensor 1 being defective. Replaced sensor. Cleared computer code. Let engine idle for 30 minutes before...


What your asking, is how to make a malfunction light
go away from your dash, so you can forget you have a
problem & make no attempt to repair the car

Until you find & resolve active OBD2 Codes that actually set
a MIL or Check Lamp it will keep coming back

Every time you clear a code you have to run a drive cylce in
some cases to start the procees over, as you need those codes
to diagnose the issues

The codes that are there, do not tell you what to replace

Without writing a book here, just study OBD Systems online &
take the car to a repair shop

It is beyond your ability at this time to figure out

Sep 22, 2011 | 2000 Toyota Camry

1 Answer

Have a 2001 Blazer which appears to be reporting false random emission codes. We have chased many of them and "fixed" the problem only to have them return , go away, new codes appear after...


There not ghost code, some come on due to function ck and then suspends the code on come on for logic codes. If you have a low fuel pressure then under a logic lean bank codes appear. If you clear that code and it reappears it can come back as a function code as misfire (due to the lack of fuel) these code do not tell you the exact problems they are just dat that is recieved at the time of the event that has occured. some codes are logic,then get suspended and some come in as function. Number one code reason are alternator related. keep me posted

Apr 23, 2011 | 2001 Chevrolet Blazer

1 Answer

"TIRE PRESSURE SENSOR FAULT" KEEPS


check tire pressure in all tires & spare.

Dec 09, 2010 | 2004 Lincoln Aviator

1 Answer

Renault Espace ABS light on constantly, break fault/stop light


hi abs light indicating you have sensor down on brakes or master cilinder is on its way out,try checking sensor will need to go to a back street garage cheaper

Mar 19, 2010 | 2005 Renault 18I

1 Answer

P0456 OBD code just appeared on a 2004 Jeep Grand Cherokee Laredo. Filled the gas tank and erased the code, but it's reappeared a week later.


That code definition is (evaporative system small leak detected). One of the most common reasons for this code is a faulty gas cap. The evap system is strictly designed to trap fuel vapors in the tank and not allow them to scape into the atmosphere. The vehicle keeps a constant vacume on the tank and when it is unable to hold that pressure it will set the code you have. Try buying a new gas cap-thats a cheap start-clear the code and see what happens. If the light comes back on you will have to bring it to a repair shop where they will tap into the Evap system and force smoke into it. They will then observe the Evap hoses and wherever it leaks smoke will be your problem.

Dec 03, 2009 | 2004 Jeep Grand Cherokee

1 Answer

The code PO420 came on for my 2000 Toyota Camray ......


Catalyst Effeciancy below threshold (Bank 1) is the code meaning. Check or replace the oxygen sensors. Some cars have 2 .One is on the front of the cat. the other is the on the back. Check the back sensor . Other possible causes are leaking or damaged exhaust manifold, bad coolant temp sensor.If toyota did not replace both . replace the one on the back of the Caty.

Feb 02, 2009 | 2003 Toyota Corolla

2 Answers

Error Codes


These may have been set by the battery change and are what GM calls phamtom codes, clear the codes with the following.
Try this and see if the codes go away.

1. Re-enter diagnostics via the climate control panel and after all the codes appear you will see .7.0

2. Simultaneously push and hold the OFF and HI (^) buttons on the climate control panel until you see E.0.0 and release both buttons.

3. Turn ignition key OFF, Wait 15 seconds and re-enter diagnostics and see if the codes reappear. If they do NOT reappear, You are good to go.
After you have done this try starting the engine and see what codes re-appear, also run and OBD 2 test of the system at the diagnostic connector, this will give P codes that we are better able to find definitions for, the E codes are unique to just a few GM cars.

Oct 13, 2008 | 1993 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vauxhall Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you a Vauxhall Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...