Question about 2011 Toyota Sienna
Parking light in fornt and rear will not shut off with car off
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
DRL's can be added simply by adding a 20 amp fuse into an empty slot in the fuse box.
Posted on Sep 03, 2008
Most likely a bad headlamp switch, UNLESS you have a remote starter hooked up. Corollas with a body computer really do not like remote starters, they cause really bizaare things to happen.
Posted on Sep 25, 2008
Most likely the problem is the lower steering knuckle. This is the one outside of the firewall, under the vehicle and it hooks up to the power steering assist cylinder. In my opinion the knuckle has to work at an unreasonably steep angle and this compounds the problem. The knuckle (especially in salt areas starts to corrode and becomes hard to turn. Toyota says the water gets into the bearing and they beings to rust the bearing and turning the whell starts to feel stiff. I have this problem and I sprayed liberal amounts of a rust inhibitor that a local place uses to rust proof cars (They sell small spray bottles of it for $5). They are called OIL TECH in Barrie, Ontario and make up their own formula. The formula has addatives that breaks the surface tension on the oil treatment and gets it into the tiny cracks and crevices on your vehicle. I sprayed this all over the knuckle, turned it back and forth a couple of times and continued spraying. I let it sit for an hour and went for a test drive -- problem solved. You could actually see the rust on the exposed parts of the knuckle. I probably will have to do this once every month of two but what the heck. It is a lot cheaper than having to replace the steering shaft ($1000+???) Probably other types of rust proofing or lubricating oils will work. I long for the old days of grease fittings and you never had to replace ball joints and tie rod ends etc.
Posted on Aug 10, 2009
SOURCE: 2003 parking bulb toyota tacoma
OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.
Posted on Nov 14, 2009
SOURCE: no brake lights
Hi my Name is Marcus . I have a 99 toyota corolla and i have problems with the brake lights . I have change the bulbs . I have check my fuses , i have also change the brake pad switch . I was told that i to change the brake switch with a part for Toyota Dealership . Plz help me
Posted on Jun 22, 2010
Tips for a great answer:
Feb 23, 2015 | 2011 Cadillac SRX
Dec 17, 2012 | Cars & Trucks
Nov 23, 2012 | Cars & Trucks
Oct 15, 2012 | Cars & Trucks
Jun 25, 2012 | 1998 Toyota Sienna
Apr 10, 2011 | 2004 Toyota Sienna
Mar 03, 2010 | 2004 Toyota Sienna
Nov 14, 2009 | 2008 Toyota Sienna
Feb 18, 2009 | 2000 Toyota Sienna
Feb 13, 2009 | 2006 Toyota Sienna
Mar 23, 2015 | 2011 Toyota Sienna
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: