Question about 2009 Nissan Altima 2.5 S

Open Question

I need to replace glove box lock cylinder. How is the cylinder removed?

My glove box latch is broken so I bought a good used glove box complete assembly. Problem is I can not determine how the lock cylinder is removed. There do not appear to be any screws or retainer clips.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pal03246
  • 705 Answers

SOURCE: Interior center bezel removal...

Clips only. Give it a good tug and it should come out.

Posted on Jul 20, 2008

alicantecoli
  • 22095 Answers

SOURCE: 1993 nissan maxima drivers door lock cylinder

you have made a boo boo somewhere,are you a certified city and guilds technician,if not then you shouldnt be repairing customers cars

Posted on Dec 20, 2008

SOURCE: need to replace 280zx ignition lock cylinder

we have a 71-681. we don't have a key.

Posted on Apr 17, 2009

  • 74 Answers

SOURCE: How to remove the frontier 2003 evaporator

I was able to remove mine by ever so slightly bending the metal supports. It sure beat taking everything apart.

Posted on Sep 07, 2009

  • 1986 Answers

SOURCE: need replacement latch glove box?

Junk yard will be the cheapest.

I don't think you'll be able to get it through an auto part store because most of these parts are not universally designed. All manufacturers make slight variations so it's hard to find an exact part.

The dealership will definitely have this part, but the price may or may not be pricey.

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Glove box not latching


will need replacing , try breakers yard as cheaper than dealer prices

Jul 27, 2015 | Chrysler Sebring Conv. 01-06 Front

1 Answer

How to change glove box lock on 1999 corvette


open the glove box and check to see if the lock is held in by 2 screws or a "c" clip. Remove them /it and the lock will come out . The lock/barrel and the latch tongue will be integral and will need replacing as a unit.

Jan 09, 2015 | 1999 Chevrolet Corvette

1 Answer

GMC Sierra 1500 Glove box latch is broken and will not open


Unfortunately, you cannot just by the latch assy from the dealer. They only carry the complete glove box assy. (cost $285). The best fix if you are near a truck salvage yard is to get one from a wrecked vehicle. I just fixed mine for $32.00 including tax. To remove the glove box, you will need to remove 3ea 7mm screws that hold the hinge to the dash. And there are 2ea alum pop rivets that you will need to drill out (I used a 3/8 drill bit). Then slide the assy to the left to free the tab on the right side. Reverse procedure to install.

Nov 14, 2012 | GMC Cars & Trucks

1 Answer

2005 slk350 glove box is locked. how do you open it.


This is a common problem with these cars, the glove box has a solenoid that locks and unlocks it, this is the problem, you will need to lock and unlock the doors with the door button not fob, you will need to do this several times until the glove box unlocks.

This sounds like yours is on the way out but if you lock and unlock a few times you should be able to get it to unlock, you may have to do this a few times, i know its time consuming but the lock will unlock.

When you get the glove box open, there are two reasons for this problem, first it may just need a little wd40 sprayed on the latch and arm, or the solenoid is bad.

The way to figure this out is with the box open spray solenoid arm and latch and then hit the lock and unlock a few times as you watch to see it move, again you may need to hit lock and unlock a few time to get it moving, once moving you will see the movement and then spray a little more, If the WD40 works then the latch will move with door locks but if you still get get the latch to move then you will need to replace the solenoid.
The last thing may be a relay, there is a relay that controls the latch but most times its latch or wd40 being the problem.

There are TSB"s on this problem and if you bought this car from the dealer i would see if they would repair it at no cost to you, its worth a try.

Jun 30, 2012 | 2005 Mercedes-Benz Mercedes Benz SLK350

2 Answers

Glove box will not open and I broke the lock and latch. How do I get into the glove box?


if the latch and lock are already broken, then use a pry bar or screw driver and break it open. that is the only way...

Jan 07, 2011 | 1997 Cadillac Catera

1 Answer

1992 mercury cougar broken glove box latch. How


you will have to pry it open and then replace the latch.good luck

Mar 01, 2010 | 1989 Mercury Grand Marquis

1 Answer

How to remove the clasp that holds the glove box front on has broken, so it is only held by one clasp how to remove and replace with a new one. Audi A4 03 reg thanks Gary.


Look here for pics: http://www.thepontiactransampage.com/glovebox.html

  1. Open glove box door.
  2. Push latch to close position.glovelock3.gif
  3. Put in lock position and remove key.
  4. Push in tab.glovelock.gif glovelock2.gif
  5. Insert key.
  6. Turn key to unlatch position and pull lock out.
  7. If the latch needs to be replace un-screw collar.
  8. Reverse to re-install.


Oct 27, 2009 | 2005 Audi A4

3 Answers

Glove box latch is broken cant open it want to replace it but cant remove it


Guess what? Volkwagen makes you buy the entire glove box assembly, including lock and door in gray, black or beige for around $145. No way to fix the latch because it is encased in sealedand glued plastic. Good luck! Mine just broke, also.

Jun 07, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

Glove box, LOCK BROKEN IN LOCK POSITION


If the glove box is anything like mine it is a modular piece assembled with screws.... let them break the handle.. get a replacement first from a junk dealer and have the broken part swapped out. Its like a seat belt catch in my 97 deville. The glove box in mine flopped open and the catch had broken and fell down the door of the glovebox itself. The whole door is assembled with philips screws and should be easily removed and a new latch put in.. whoever does it should not cost more than 50.00 in labor MAYBE unless you have a friend that would do it for a beer. I saw a complete glove box on ebay for 40.00 shipping ontop of that .. i saw the latch for 20.00 +shipping.

Sep 29, 2008 | 1998 Cadillac DeVille

Not finding what you are looking for?

Open Questions:

See all 2009 Nissan Altima 2.5 S Questions

2009 Nissan Altima 2.5 S Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...