Question about Honda Cars & Trucks
My car is showing check emission system and the car is not running smoothly
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: engine light on Codes show
Hello! Those three codes commonly indicate the followi possibilities:
The gas cap was not sufficiently tightenend ater fueling, a bad gas-cap rubber o-ring, the vehicle had the key in the 'on', or engine running, or the tank was filed all of the way up the neck.
Any one of the abope causes will set all three codes.
Posted on Dec 21, 2009
SOURCE: saturn sl2 emissin problem
If the SES light is on, take a paper clip bend it in a u-shape and jump the scanner input positions A B. This should flash the ses in sequesces to give you the trouble code, Please see the following link. http://www.troublecodes.net/GM/ Refer to the code to see what the issue may be. SES lit means that there is a emmissions related issue. Refer to the other links for additonal information on O2 sensor resistance, and the egr valve solinoid. Check the EGR is relitive easy for operation. Remove the vaccum hose and place a hose of similar suckon the hose to pull vaccum if the diafram underneith retracts, hold the vaccum by plugging off the tube with your touge if the diafram retracts, will not hold the vaccum, it is bad. The solinoid should read 40-60 ohms if good. http://www.saturnfans.com/forums/index.php http://www.aldlcable.com/sc/pages.asp?pageid=21
Posted on Jun 01, 2009
SOURCE: fix honda pilot 2005 fan relay
It can be the A/C switch causing this, but not likely. Make sure to turn the A/C off when you stop. If it still does it after turning the A/C off, replace the thermal relay.
Posted on Oct 04, 2009
Two reasons for this ...
1. the fuel pump is over pumping
2. one of the jets in the Multi Point Fuel injection system is jammed and constantly pumping gas into the cylinder.
Get a good injection cleaner fuel addative... this will solve your problem... though it will take a few days of driving before the RPM settles down below 1K RPM.
Posted on Feb 22, 2010
Tips for a great answer:
Sep 28, 2017 | Honda Cars & Trucks
Sep 30, 2016 | 2011 Honda Pilot Touring
Jan 01, 2016 | 2005 Honda Pilot
Mar 09, 2015 | 2003 Honda Pilot
Feb 20, 2014 | 2010 Honda Pilot
Nov 11, 2013 | Honda Cars & Trucks
Jun 05, 2012 | 2007 Honda Pilot
Aug 14, 2010 | Honda Pilot Cars & Trucks
Oct 01, 2009 | Daihatsu Charade Cars & Trucks
509 people viewed this question
Usually answered in minutes!